employee
Bryansk, Bryansk, Russian Federation
graduate student
Bryansk, Bryansk, Russian Federation
UDK 621.828 Шарниры. Рычаги. Коленчатые шарнирные соединения. Коромысла (балансиры). Шарнирные болты
BBK 344 Общее машиностроение. Машиноведение
Wear mechanism of friction pairs in the articulated joints of steering gears of UAZ-Hunter -315195 cars is considered. The wear process of friction pairs "bush (cup) – ball pin" closed with spherical spring washers and a spring cap used in the design of the swivel joint of the car steering gear is described. The effect of fretting corrosion on the destruction of a ball joint is studied.
hinge, mechanism, friction, sealing, fretting corrosion, tribo-tension, material, tightness, wear resistance
1. Korovin MA, Sazonov EV, Sazonov VV. Malfunctions of machine parts. Collection of Scientific Papers of All-Russian National Science and Technology Conference, April 13-14, 2023: Prospects for the Development of Processing Technologies and Equipment in Mechanical Engineering; Voronezh: Voronezh State Technical University; 2023.
2. Pamfilov EA, Kapustin VV. Kuzmin PV. Influence and optimization of the stress state of functional surface layers of sliding bearings to increase their wear resistance. Collection of Papers of the International Scientific and Practical Conference Dedicated to the 90th Anniversary of the Civil Defense, October 20-21, 2022: Tribology and Problems of the Ministry of Emergency Situations of Russia; Ivanovo: Ivanovo Fire and Rescue Academy of the Ministry of Emergency Situations of Russia; 2022.
3. Pogonyshev VA, Mokshin IA, Pogonysheva DA. Tribotechnical processes of fretting wear. Nauka v Tsentralnoi Rossii. 2022;3(57):84-91.
4. Prozorov YaS, Tupitsky OO. Study of corrosion-mechanical wear by applying an external potential. Novie Materiali I Technologii v Mashinostroenii. 2014;20:78-84.
5. Semynin MV, Kostenko MYu. On the problem of reducing ball joints wear of agricultural vehicles. Agrarny Vestnik Verkhnevolzya. 2022;4(41):96-102.
6. Tebekin MD. Improving the efficiency of determining the technical condition of the ball joints of the passenger car suspension [dissertation]. [Orel (RF)]; 2015.
7. Shets SP, Sakalo VI, Suslov AG. Interrelation of tightness of bearing friction units with abrasive wear of their tribounits. Bulletin of Bryansk State Technical University. 2016;2(50):36-40.
8. Shets SP, Gorlenko AO. Processes of wear in friction pairs "manget neck - cuff edge". Bulletin of Bryansk State Technical University. 2018;5(66):33-39.
