employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
employee
Khabarovsk, Khabarovsk, Russian Federation
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.13 Технология машиностроения
The paper presents the results of research justifying the need for diagnostics of metalworking technological systems on the reliability of ensuring the quality parameters of the surfaces of machine parts during machining. The fundamentals of the methodology of its implementation have been developed. Theoretical models of forming the quality parameters of parts surfaces during machining are considered and refined. This characterizes the scientific novelty of the results obtained. Circuitries for the construction of experimental control systems when conducting bench tests of machined surfaces of parts in conditions close to operational are of practical value. Circuitries are developed and computerized systems based on them for measuring the quality parameters of machined parts surfaces, including the working area of the technological system, are implemented. Recommendations on the rational choice of technological systems and the use of simulation methods in the study of parametric reliability of technological systems are presented. Mathematical and software analysis and processing of experimental results are developed and tested. These results will serve as a foundation for further development of research in the field of parametric reliability of technological systems, improving the quality of domestic engineering products and increasing their competitiveness at the world market.
models, parameters, quality, diagnostics, task, simulation modeling
1. Ryzhov, E. V. Tehnologicheskoe obespechenie ekspluatacionnyh svoystv detaley mashin. / E. V. Ryzhov, A. G. Suslov, V. P. Fedorov. - Moskva : Mashinostroenie, 1979. - 174 s.
2. Tehnologicheskoe obespechenie i povyshenie ekspluatacionnyh svoystv detaley i ih soedineniy / A. G. Suslov, V. P. Fedorov, O. A. Gorlenko [i dr.] ; pod obsch. red. A. G. Suslova. - Moskva : Mashinostroenie, 2006. - 447 s. - ISBN 5-217-03308-8.
3. Inzheneriya poverhnosti detaley / Koll. avt. ; pod red. A.G. Suslova. - Moskva : Mashinostroenie, 2008. - 320 s. - ISBN 978-5-217-03427-7.
4. Fyodorov, V. P. Determination of parametric reliability of machining technological systems by simulation technique. / V. P. Fyodorov, M. N. Nagorkin, A. V. Totai / IOP Conf. Series: Materials Science and Engineering. 124 (2016) 012053. - DOIhttps://doi.org/10.1088/1757-899X/124/1/012053.
5. Parametricheskaya nadezhnost' tehnologicheskih sistem lezviynoy i uprochnyayuschey obrabotki instrumentami iz sinteticheskih sverhtverdyh materialov po geometricheskim parametram kachestva i tribotehnicheskim harakteristikam poverhnostey detaley / M. N. Nagorkin, V. P. Fedorov, V. V. Nagorkina, E. V. Kovaleva // Progressivnye mashinostroitel'nye tehnologii, oborudovanie i instrumenty; Tom VII. : kollektivnaya monografiya ; pod red. A. V. Kiricheka. - Moskva : Spektr, 2016. - S. 506-688. - DOIhttps://doi.org/10.14489/4442-0118-3
6. Nagorkin, M. N. Parametricheskaya nadezhnost' tehnologicheskih sistem chistovoy i otdelochno-uprochnyayuschey obrabotki poverhnostey detaley mashin instrumentami iz sverhtverdyh sinteticheskih materialov: monografiya / M. N. Nagorkin ; pod red. A. V. Kiricheka. - M. : Spektr, 2017. - 304 s. - DOIhttps://doi.org/10.14489/4442-0132-9.
7. Suslov A. G. Kompleksnyy podhod k eksperimental'nym issledovaniyam tehnologicheskih sistem metalloobrabotki po obespecheniyu parametrov kachestva i ekspluatacionnyh svoystv poverhnostey detaley mashin / A. G. Suslov, V. P. Fedorov, M. N. Nagorkin, I. L. Pyrikov // Naukoemkie tehnologii v mashinostroenii. - 2018. - № 10. - S. 3-13. - DOI:https://doi.org/10.30987/article_5bb4b1f9abbc54.46761484.
8. Fedorov, V. P. Diagnostika tehnologicheskih sistem po nadezhnosti obespecheniya zadannyh parametrov kachestva obrabatyvaemyh poverhnostey detaley / V. P. Fedorov, A. G. Suslov, M. N. Nagorkin // Naukoemkie tehnologii v mashinostroenii. - 2020. - № 1 (103). - S. 15-24. - DOIhttps://doi.org/10.30987/2223-4608-2020-2020-1-15-24
9. Fedorov V. P. Avtomatizaciya diagnostiki tehnologicheskih sistem po parametram kachestva poverhnostey obrabatyvaemyh detaley / V. P. Fedorov, M. N. Nagorkin, I. L. Pyrikov [i dr.] // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta - 2012. - № 1 (33). - S. 85-94. - ISSN 1999-8775.
10. Nagorkin, M. N. Automation of technological system diagnostics by parameters of quality of surfaces of machined parts / M. N. Nagorkin, V. P. Fyodorov, E. V. Kovalyova // Lecture notes in mechanical engineering. Proceedings of the 4th International conference on industrial engineering (ICIE 2018). - Pp. 1535-1545. - DOI: org/10.1007/978-3-319-95630-5_164.
11. Vainer, L. G. Vibroacoustic diagnostics of bidirectional end milling / L. G. Vainer, F. S. Sabirov, A. V. Rivkin // Russian engineering research. 2015, vol. 35, No. 6, - pp. 458-461. - DOI:https://doi.org/10.3103/S1068798X15060179.
12. Vayner, L. G. Izmerenie i diagnostika parametrov torceshlifoval'noy obrabotki // Vestnik Tihookeanskogo gosudarstvennogo universiteta. - 2019. - №2. - S. 35-42. - ISSN 1996-3440.
13. Modelirovanie i upravlenie kachestvom poverhnostnogo sloya detaley s primeneniem sovremennyh sredstv instrumental'nogo obespecheniya i komp'yuternyh tehnologiy / V. P. Fedorov, M. N. Nagorkin, I. L. Pyrikov, M. P. Toporkov // Progressivnye tehnologii i sistemy mashinostroeniya. - 2016. - № 2 (53). - S. 138-147. - ISSN 2073-3216.
14. Pronikov, A. S. Nadezhnost' mashin / A. S. Pronikov. - Moskva : Mashinostroenie, 1978. - 592 s.
15. Pronikov, A. S. Parametricheskaya nadezhnost' mashin / A. S. Pronikov. - Moskva : Izd-vo MGTU im. N.E. Baumana, 2002. - 560 s. - ISBN 5-7038-1996-2.
16. Fedorov, V. P. Problemy issledovaniya i povysheniya nadezhnosti tehnologicheskogo obespecheniya kachestva detaley mashin / V. P. Fedorov // Trenie i iznos - 1997. - Tom 18, № 3. - S. 349-360. - ISSN: 0202-4977.
