Russian Federation
GRNTI 20.01 Общие вопросы информатики
The article discusses the problems associated with the visualization of metalworking processes, describes the approaches and presents the implementation in the form of software modules, which show the imitation of the work of turning and milling. The developed modules simulate metalworking according to the instructions of the control programs in the G-code. The implementation of the modules is prepared for simple control programs; however, the developed software applications provide for the expansion of the functionality of the simulation processes in metalworking. The results of the work of the modules can be transferred to third-party CAD systems using export data formats.
geometric core, visualization of processing processes, imitation of milling processes, imitation of turning processes, control programs, CNC equipment, export CAD data formats
1. Yurov, A.N. Proektirovanie avtomatizirovannoy sistemy proizvodstvennyh planirovok / A.N. Yurov // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 87 - 93.
2. Yurov, A.N. Programmnoe modelirovanie i vizualizaciya geometricheskih tel sredstvami yadra OCCT / A.N. Yurov, I.A. Eremin // Informatika: problemy, metodologiya, tehnologii : sbornik materialov XVII mezhdunarodnoy nauchno-metodicheskoy konferencii : v 5 t.- Voronezh, 2017. -T. 4. - S. 340-345.
3. Yurov, A.N. Programmnoe reshenie dlya geometricheskih postroeniy sredstvami OCCT / A.N. Yurov // Informatika: problemy, metodologiya, tehnologii : sbornik materialov XVIII mezhdunarodnoy nauchno-metodicheskoy konferencii : v 7 t. - Voronezh, 2018. -T. 6. - S. 208-211.
4. Pan, G.Y. Research on Parametric Modeling of Ball Screw Based on Open CASCADE / G.Y. Pan, J. Han, H.T. Feng // Machine Building & Automation. - 2015. - V. 3.
5. Hua, D. Development and Research of CAD System Based on an Open CASCADE Platform / D. Hua, W. Zhong // Journal of Southwest University of Science and Technology. - 2014. - I. 2. - Pp. 72-76.
6. Quick segmentation for complex curved surface with local geometric feature based on IGES and Open CASCADE / F. Wang, J. Ma, Q. Xu, Z. Jia, Y. Yang // Advances in Engineering Software. - 2015. - V. 87. Pp. 86-96. - DOI:https://doi.org/10.1016/j.advengsoft.2015.04.010.
7. Sheen, D. M. Automation Planning System of Block assembly using an OPEN CASCADE / D. M. Sheen, S.S. Choi // Proceedings of the Korea Committee for Ocean Resources and Engineering Conference. - 2003. - Pp. 17-21.
