Voronezh, Voronezh, Russian Federation
Russian Federation
Dangerous and harmful production factors are considered, the impact of which is experienced by workers during the construction of any facility. Analyzed: the reasons for the formation of these factors for various types of work; equipment, structures and materials, the impact of which on working personnel can also lead to adverse situations. It is noted that the means of individual protection must be selected, paying attention to what kind of work will be performed by the employee and under what conditions. The most effective personal protective equipment and technological methods for improving working conditions at the facility are proposed for use by the workers of the object under consideration. The results obtained can be used to improve the working conditions of workers in warehouses with raw materials.
modeling, labor protection, technological methods, personal protective equipment, warehouse, packaged bulk materials, construction industry
1. Ignatyuk, A. S. Process teplovizionnogo obsledovaniya ograzhdayuschih konstrukciy zdaniya / A. S. Ignatyuk, S. D. Nikolenko, S. A. Sazonova // Modelirovanie sistem i processov. - 2019. - T. 12, № 4. - S. 66-72.
2. Vereschagin, A. Yu. Programma geotehnicheskogo monitoringa ob'ektov, vhodyaschih v zonu vliyaniya stroitel'stva / A. Yu. Vereschagin, S. D. Nikolenko, S. A. Sazonova // Modelirovanie sistem i processov. - 2019. - T. 12, № 4. - S. 4-9.
3. Andreev, E. S. Modelirovanie defektov pri ul'trazvukovom kontrole svarnyh soedineniy / E. S. Andreev, S. D. Nikolenko, S. A. Sazonova // Modelirovanie sistem i processov. - 2020. - T. 13, № 1. - S. 4-9.
4. Panteleev, A. I. Process obsledovaniya nesuschih konstrukciy tehnologicheskih estakad / A. I. Panteleev, S. D. Nikolenko, S. A. Sazonova // Modelirovanie sistem i processov. - 2020. - T. 13, № 1. - S. 61-68.
5. Nikolenko, S. D. Avtomatizaciya processa kontrolya kachestva svarnyh soedineniy / S. D. Nikolenko, S. A. Sazonova, N. V. Akamsina // Modelirovanie sistem i processov. - 2020. - T. 13, № 3. - S. 76-85.
6. Metody kontrolya nadezhnosti pri razrabotke mikroshem / K. V. Zol'nikov, S. A. Evdokimova, T. V. Skvorcova, A. E. Gridnev // Modelirovanie sistem i processov. - 2020. - T. 13,№ 1. - S. 39-45.
7. Opredelenie meropriyatiy po programme obespecheniya kachestva rabot proektirovaniya i seriynogo proizvodstva mikroshem i ocenka ih effektivnosti na primere SBIS 1867VN016 / K. V. Zol'nikov, A. S. Yagodkin, S. A. Evdokimova, T. V. Skvorcova // Modelirovanie sistem i processov. - 2020. - T. 13, № 1. - S. 46-53.
8. Zol'nikov, V. K. Verifikaciya proektov i sozdanie testovyh posledovatel'nostey dlya proektirovaniya mikroshem / V. K. Zol'nikov, S. A. Evdokimova, T. V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 10-16.
9. Zol'nikov, V. K. Metody verifikacii slozhno-funkcional'nyh blokov v SAPR dlya mikroshem gluboko submikronnyh proektnyh norm / V. K. Zol'nikov, S. A. Evdokimova, T. V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 16-24.
10. Zol'nikov, V. K. Prakticheskie metodiki vypolneniya verifikacii proektirovaniya mikroshem / V. K. Zol'nikov, S. A. Evdokimova, T. V. Skvorcova // Modelirovanie sistem i processov. - 2019. - T. 12, № 1. - S. 25-30.
