Minsk, Belarus
Minsk, Belarus
The aim of this work is to experimentally study the relationship between mechanical properties using the example of the normal anisotropy coefficient of sheet metal, mechanical stresses during elastic deformation of electrical steel and anisotropy of the physical and mechanical properties of a set of steels and alloys with magnetic noise parameters. The mechanical anisotropy of the ferromagnetic materials properties predetermines the need for its study and evaluation, since it has a significant impact on the basic physical and mechanical characteristics of components, products and structures. Taking into account the relationship between the physical and mechanical properties of the material with the magnetic characteristics, to study the possibility of non-destructive testing of anisotropy the method of the Barkhausen effect was used, the informative parameters of which are magnetostructural and magnetoanisotropic. To study mechanical anisotropy a device for circular rotation of the Barkhausen transducer over the sample surface and a device for the production of elastic tensile / compressive stresses during static bending were made. Comparison of the results obtained using magnetic noises with the known coefficients of normal anisotropy of thin-sheet steel samples showed their qualitative and quantitative agreement, confirming the presence of a close relationship between them. It was found that elastic deformation in samples of anisotropic electrical steel leads to a sharp change in the level of magnetic noise and the type of circular diagrams, taking into account the sign of stresses. It is shown that as a result of cold rolling according to magnetic noise the samples have a pronounced texture due to the direction of rolling along the longest side of the sheet. The formed elastic deformation under tension and compression during static bending practically does not change the texture - the induced crystallographic anisotropy after rolling. The relationship between the intensity of magnetic noise and the degree of anisotropy is established and the possibility of evaluating the magnetic anisotropy in various steels and alloys using the Barkhausen effect method is investigated and confirmed.
anisotropy, Barkhausen effect method, magnetic noise, elastic deformation, bending, tensile / compressive stresses, structure, inhomogeneity.
1. Miklyaev P. G., Fridman Ya. B. Anizotropiya mehanicheskih svoystv metallov. - M.: Metallurgiya, 1986. - 224 s.
2. Gorkunov E. S., Dragoshanskiy Yu. N. Effekt Barkgauzena i ego ispol'zovanie v strukturoskopii ferromagnitnyh materialov (obzor I). - Defektoskopiya. 1999. № 6. S. 3-23.
3. Radchenko A. V., Radchenko P. A. Numerical modeling of development of fracture in anisotropic composite materials at low-velocity loading. - J. Materials Sci. 2010. V. 46. No. 8. P. 2720-2725.
4. Korzunin G. S., Sysolyatina I. P., Chistyakov V. K., Bulychev O. A. Vliyanie anizotropii magnitnyh svoystv elektrotehnicheskoy stali na magnitnye poteri magnitoprovodov silovyh transformatorov. - Defektoskopiya. 2010. № 9. S. 10-16.
5. Tiunov V. F., Korzunin G. S. Kontrol' neodnorodnosti magnitnoy pronicaemosti listovoy anizotropnoy elektrotehnicheskoy stali. - Defektoskopiya. 2019. № 3. S. 46-49.
6. Bida G. V., Nichipuruk A. P. Mnogoparametrovye metody v magnitnoy strukturoskopii i nerazrushayuschem kontrole mehanicheskih' svoystv staley. - Defektoskopiya. 2007. № 8. S. 3-24.
7. Korzunin G. S., Lavrent'ev A. G. Kontrol' parametrov kristallograficheskoy tekstury elektrotehnicheskoy stali po protoku skachkov Barkgauzenna. - Defektoskopiya. 1999. № 6. S. 24-27.
8. Scherbinin V. E., Gorkunov E. S. Magnitnyy kontrol' kachestva metallov. - Ekaterinburg, 1996. - 266 s.
9. Gorkunov E. S., Zadvorkin S. M., Hudorozhkova Yu. V., Korzunin G. S. Vliyanie tipa kristallograficheskoy tekstury na anizotropiyu parametrov magnitnyh poley rasseyaniya stal'nogo listovogo prokata. - Fizicheskaya mezomehanika. 2019. T. 22. № 3. S. 54-64.
10. Ogneva M. S., Nichipuruk A. P., Stashkov A. N. Lokal'noe opredelenie polya navedennoy magnitnoy anizotropii i urovnya ostatochnyh mehanicheskih napryazheniy v deformirovannyh rastyazheniem ob'ektah iz malouglerodistyh staley. - Defektoskopiya. 2016. № 11. S. 3-9.
11. Matyuk V. F. Sostoyanie nerazrushayuschego kontrolya shtampuemosti listovogo prokata staley. - Nerazrushayuschiy kontrol' i diagnostika. 2012. № 3. S. 15-42.
12. Rudyak V. M. Effekt Barkgauzena. - Uspehi fizicheskih nauk. 1970. T. 101. Vyp. 3. S. 429-462.
13. Gorkunov E. S., Dragoshanskiy Yu. N., Mihovski M. Effekt Barkgauzena i ego ispol'zovanie v strukturoskopii ferromagnitnyh materialov (obzor II). - Defektoskopiya. 1999. № 7. S. 3-32.
14. Blaou M. M., Shau B. A. Magnitnye shumy Barkgauzena dlya nadezhnogo obnaruzheniya zony termicheskogo vliyaniya v svarnoy plastine iz sudostroitel'noy stali. - V mire NK. 2014. № 4. S. 70-75.
15. Ivánova Y., Partalin T. Sravnitel'nye izmereniya napryazhennogo sostoyaniya prokata uglerodistoy stali posredstvom shuma Barkgauzena i ul'trazvuka. - Defektoskopiya. 2012. № 2. S. 83-94.
16. Antonov A. A., Letunovskiy A. P. Vozmozhnosti ocenki ostatochnyh napryazheniy v svarnyh konstrukciyah. - V mire NK. 2018. T. 21. № 1. S. 10-12.
17. Grishakov S. V., Kovalev A. I. Ocenka napryazheniy i povrezhdeniy v ferromagnitnyh materialah metodom magnitnyh shumov. - Kiev: Navukova dumka. 1991. - 168 s.
18. Bus'ko V. N., Osipov A. A. Primenenie magnitoshumovogo metoda dlya kontrolya mehanicheskoy anizotropii ferromagnitnyh materialov. - Pribory i metody izmereniy. 2019. T. 10. № 3. S. 281-292
19. Bus'ko V. N., Vengrinovich V. L., Chepyzhov B. A. Nerazrushayuschiy kontrol' izdeliy iz vysokoprochnogo chuguna metodom magnitnyh shumov. - Zavodskaya laboratoriya. Diagnostika materialov. 2011. № 10. T. 77. S. 30-36.
20. Grechnikov F. V., Erisov Ya. A., Zaycev V. M. K raschetu srednego znacheniya koefficienta anizotropii listovyh materialov. - Izvestiya Samarskogo nauchnogo centra RAN. 2014. T. 16. № 4. S. 154-157.
21. Gorkunov E. S., Zadvorkin S. M., Dimitrov R. Vliyanie tipa kristallograficheskoy tekstury na anizotropiyu magnitnyh svoystv stal'nogo prokata. - Nauchni izvestiya na NTSM («NDT days 2017»), Bolgariya, Godina HHV. Broy 1(216). 2017. S. 29-34.
22. Filinov V. V., Shaternikov V. E., Rukavishnikov I. V. i dr. Primenenie metoda magnitnyh shumov dlya kontrolya tehnologicheskih napryazheniy. - Kontrol'. Diagnostika. 2005. № 3. S. 17-22.
