Belgorod, Russian Federation
Yakutsk, Russian Federation
Yakutsk, Russian Federation
UDK 66 Химическая технология. Химическая промышленность. Родственные отрасли
GRNTI 61.35 Технология производства силикатных и тугоплавких неметаллических материалов
OKSO 18.02.05 Производство тугоплавких неметаллических и силикатных материалов и изделий
BBK 35 Химическая технология. Химические производства
TBK 542 Технология строительно-монтажных работ
TBK 554 Химическая промышленность
BISAC TEC009010 Chemical & Biochemical
Additive technologies that allow creating volume objects of different complexity are becoming popular in different industries. There is an increase in the scale of introduction of 3D printing technologies in the construction industry, including in the production of ceramic products. With the help of modern additive technologies, different models, products and designs are created. They can be complex and can be made from different materials. Experts are wondering what the future holds for additive technologies in construction, as well as in ceramic production, as these technologies can save resources, reduce the time of the technological process and form complex shapes. The article presents an analytical review of the global application of additive technologies in construction, as well as in the manufacture of ceramic products. The advantages and disadvantages, the possibilities of 3D printing are considered. The creation of ceramic three-dimensional products is still a rare area of additive technologies that requires research. The production of ceramic products, superior to other materials in terms of high temperature strength, hardness, chemical and thermal resistance, has a high potential for the use of additive technologies. The types of construction 3D printers and raw materials for them are analyzed. The results of a study of the properties of clay raw materials of the Sannikovsky, Namtsyrsky and Kangalassky deposits of the Republic of Sakha (Yakutia) are presented.
Additive technology, 3D printing, clay raw materials, clay minerals, particle size distribution
1. Glazunov V.S., Cherepanova M.V. The use of additive technologies in the manufacture of ceramic products [Primenenie additivnyh tekhnologij v proizvodstve keramicheskih izdelij]. Bulletin of PNIPU. 2018. No. 4. Pp. 174-186. (rus)
2. Krahmatova V.YU., Zaharov A.I. The formation of the mass of the additive production of ceramic products [Formirovanie massy additivnogo proizvodstva keramicheskih izdelij]. Advances in Chemistry and Chemical Technology. 2016. No. 7. Pp. 53-54. (rus)
3. Maksimov N.M. Additive technologies in construction: equipment and materials [Additivnye tekhnologii v stroitel'stve: oborudovanie i materialy]. Additive Manufacturing. 2017. No. 4. Pp. 54-62. (rus)
4. Lesovik V.S., Elistratkin M.YU., Glagolev E.S., SHatalova S.V., Starikov M.S. Formation of properties of compositions for building printing [Formirovanie svojstv kompozicij dlya stroitel'noj pechati]. Bulletin BGTU named after V.G. Shukhov. 2017. No. 10. Pp. 6-13. doi:https://doi.org/10.12737/article_59cd0c57ede8c1.83340178. (rus)
5. Elistratkin M.YU., Lesovik V.S., Alfimova N.I., Glagolev E.S. On the development of building printing technologies [O razvitii tekhnologij stroitel'noj pechati]. Bulletin BGTU named after V.G. Shukhov. 2018. No. 5. Pp. 11-16. doi:https://doi.org/10.12737/article¬_5af5a727274397.04099320. (rus)
6. Borisov N.N., Kochnev N.N. Explanatory note to the overview map of deposits of building materials of the Yakut Autonomous Soviet Socialist Republic on a scale of 1: 2500000 [Ob"yasnitel'naya zapiska k obzornoj karte mestorozhdenij stroitel'nyh materialov Yakutskoj ASSR masshtaba 1:2500000]. 1988. Vol. 1. 421 p. (rus)
7. Promahov V.V., Zhukov I.A., Vorozhcov S.A. The additive method of molding products from powders of refractory compounds [Additivnyj sposob formovaniya izdelij iz poroshkov tugoplavkih soedinenij] Polzunovskij bulletin. 2016. Vol.1. No. 4. Pp. 59-63. (rus)
8. Eckel Z.C., Zhou C., Martin J.H., Jacobsen A.J., Carter W.B., Schaedler T.A., Additivemanufacturing of polymer-derived ceramics. Science. 2016. Vol. 351. Issue. 6268. Pp. 58-62. doi:https://doi.org/10.1126/science.aad2688.
9. Zak C. Eckel, Chaoyin Zhou, John H. Martin, Alan J. Jacobsen, William B. Carter and Tobias A. Schaedle. Additive manufacturing of polymer-derived ceramics. Science. 2016: Vol. 351. Issue. 6268. Pp. 58-62.
10. Faes M., Ferraris E., Vleugels J., Vogeler F. Extrusion-based additive manufacturing of ZrO2 using photoinitiated polymerization. CIRP Journal of Manufacturing Science and Technology. 2016. No. 14. Pp. 28-34.
11. Sardarian M., Mirzaee O., Habibolahzaden A. Numerical simulation and experimental investigation on jetting phenomenon in low pressure injection molding (LPIM) of alumina. Journal of Materials Processing Technology. 2017. Vol. 243. Pp. 374-380.
12. Gonzalez J.A., Lin Y., Mireles J., Wicker R.B. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology. Original Research Article Ceramics International. 2016. Vol. 42. Issue. 9. Pp. 10559-10564.
13. Zocca A., Colombo P., Gomes C.M. Additive Manufacturing of Ceramics. Potentialities, and Opportunities. 2015. No. 9. Pp. 637-643.
14. Yoo J., Cima M.J., Khanuja S. Structural ceramic components by 3D printing. Solid FreeForm Fabr. Symp. 1995. Pp. 479-488.
15. Offering Automated Construction of Various Types of Structures. URL: http://contourcrafting.com/building-construction/ (date of treatment: 16.09.2019).
16. The volume of the Russian additive technology market in 2018 may exceed 6 billion rubles. URL: https://www.3dpulse.ru/news/analitika/obyom-rossiiskogo-rynka-additivnyh-tehnologii-v-2018-godu-mozhet-prevysit-6-mlrd-rublei/ (date of treatment: 15.10.2019)
17. The first 3D-printed residential building in Europe presented in Yaroslavl. URL: https://specavia.pro/articls/pervyj-v-evrope-zhiloj-dom-napechatannyj-na-3d-printere-predstavili-v-yaroslavle/ (date of treatment: 11.09.2019).
18. Additive Manufacturing (AM). URL: http://www.tadviser.ru/index.php/(Additive_Manufacturing) (date of treatment: 15.10.2019).
19. Additive technology for ceramic printing. URL: http://integral-russia.ru/2016/12/30/additivnye-tehnologii-dlya-pechati-keramiki/ (date of treatment: 17.10.2019).
20. Additive technologies in construction. URL: https://3d-expo.ru/ru/article/additivnie-tehnologii-v-stroitelstve-75947 (date of treatment: 17.10.2019).
