ON THE EDUCATIONAL-METHODICAL COMPLEX OF DISCIPLINE «ENGINEERING AND COMPUTER GRAPHICS» IN TERMS OF MODERNIZATION OF THE COURSE OF DESCRIPTIVE GEOMETRY
Abstract and keywords
Abstract (English):
In connection with the use of machine-building enterprises to create new products of computer-aided design, which solve the problem in three-dimensional space, the problem of modernization of the course of descriptive geometry becomes relevant. The article describes the experience of the Department of descriptive geometry and drawing of the Ufa state aviation technical University for the modernization of the course of descriptive geometry. The questions of development of educational and methodical complex of the modernized discipline “engineering and computer graphics”, about its components which are prepared by Department and are used in educational process at training of bachelors in the directions which are included in the enlarged group of 150000 «Mechanical engineering» are in detail considered.

Keywords:
modernization of the course of descriptive geometry, educational and methodical complex of discipline, academic bachelors, rating technology of training, types of educational activities, the system of distance education.
Text

В настоящее время на всех авиа- и машиностроительных предприятиях в процессе проектирования новых изделий широко используются системы автоматизированного проектирования. Инженеры-конструкторы, выполняя возложенные на них функции, начинают создавать новые изделия в виде 3D моделей сборок проектируемых объектов, т.е. работают в пространстве, а не на плоском чертеже. Это объясняется тем, что системы автоматизированного проектирования предоставляют в руки конструктора инструментарий, с помощью которого возможно выполнение любых построений и решение различных геометрических задач в пространстве с заданной точностью [6]. Поэтому на стадии проектирования отпадает необходимость использования плоского чертежа. В связи с этим начертательная геометрия как наука, являющаяся теоретической основой проектирования и изображения объектов и остающаяся актуальной и востребованной в наше время, должна претерпеть соответствующую модернизацию учебного курса в техническом вузе. Публикации, в которых затрагивается проблема модернизации курса начертательной геометрии, начали появляться более 10 лет назад. Сделаем ссылку на некоторые из них [2–5, 15, 16], авторы которых высказывают свое видение этой проблемы и предлагают пути ее решения. На кафедре начертательной геометрии и черчения Уфимского государственного авиационного технического университета (УГАТУ) с 2010 г. проводится постепенное изменение содержания курса начертательной геометрии. Модернизированный курс, разработанный в рамках подготовки вузом учебных планов и рабочих программ в соответствии с ФГОС ВПО и ФГОС ВО, называется «Инженерная и компьютерная графика». В этом курсе мы уменьшили количество времени на изучение разделов, посвященных рассмотрению алгоритмов решения метрических и позиционных задач на плоском чертеже, а также преобразованию комплексного чертежа. Вместо этого увеличили время:
 на изучение параллельной и ортогональной аксонометрии;
 способов задания геометрических объектов в трехмерном пространстве; 

 способов образования и задания технических поверхностей (при этом кинематический способ образования поверхностей связываем с существующими формообразующими командами твердотельного моделирования, а также командами поверхностного моделирования систем автоматизированного проектирования). В настоящее время для направлений обучения академических бакалавров, входящих в укрупненную группу 150000 «Машиностроение», объем курса инженерной и компьютерной графики составляет 10 зачетных единиц и изучается в течение трех семестров.

References

1. Vektornaya sistema konstruktorskoy grafi ki KOMPAS-17. Postroenie zadannoy konfi guratsii liniy i chertezhey ploskikh detaley: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafi ka» [Vector system of design graphics KOMPAS-17. Construction of a specifi ed confi guration of lines and drawings of fl at parts: a laboratory workshop on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2018. 63 p.

2. Vol’khin K.A., Golovnin A.A. Utochnenie zadach grafi cheskogo obrazovaniya v usloviyakh avtomatizatsii proektnykh rabot [Specifi cation of the tasks of graphic education in the context of automation of design works]. Problemy kachestva grafi cheskoy podgotovki studentov v tekhnicheskom vuze v usloviyakh FGOS VPO. Materialy Mezhdunarodnoy nauchno-prakticheskoy internet-konferentsii (fevral’-mart 2011) [Problems of the quality of graphic preparation of students in a technical college in the conditions of the GEF HPE. Materials of the International Scientifi c and Practical Internet Conference (February-March 2011)]. Perm’: Permskiy gosudarstvennyy tekhnicheskiy universitet Publ., 2011, pp. 138-141.

3. Gornov A.O., Leparov M.N. Sistemnye protivorechiya i predposylki inzhenernoy geometrii v obrazovatel’nom aspekte [System contradictions and the preconditions of engineering geometry in the educational aspect]. Problemy kachestva graficheskoy podgotovki studentov v tekhnicheskom vuze: problemy, traditsii i innovatsii (KGP-2017). Materialy VII mezhdunarodnoy nauchno-prakticheskoy internet-konferentsii (fevral’-mart 2017) [Problems of the quality of graphic preparation of students in a technical university: problems, traditions and innovations (KGP-2017). Materials of the VII International Scientifi c and Practical Internet Conference (February-March 2017)]. Perm’: PNIPU Publ., 2017, V. 1, pp. 14-20.

4. Ivanov G.S. Perspektivy nachertatel’noy geometrii kak uchebnoy distsipliny [Perspectives of descriptive geometry as a discipline]. Geometriya i grafi ka [Geometry and graphics]. 2013, V. 1, I. 1, pp. 26-27. DOI:https://doi.org/10.12737/467.

5. Ivanov G.S. Predystoriya i predposylki transformatsii nachertatel’noy geometrii v inzhenernuyu [Background and preconditions for the transformation of descriptive geometry into engineering]. Geometriya i grafi ka [Geometry and graphics]. 2016, V. 4, I. 2, pp. 29-36.

6. Li K. Osnovy SAPR (CAD/CAM/CAE) [Fundamentals of CAD (CAD / CAM / CAE)]. St. Petersburg, Piter Publ., 2004. 560 p.

7. Modelirovanie listovoy detali: laboratornyy praktikum po distsipline «Informatsionnye tekhnologii v mashinostroenii» [Modeling of a sheet metal part: laboratory practical work on discipline “Information technologies in mechanical engineering”]. Ufa: RIK UGATU Publ., 2015. 29 p.

8. Postroenie tverdotel’nykh modeley i chertezhey detaley «Ruchka», «Korpus», «Patrubok» v KOMPAS-3D: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafika» [Construction of solid models and drawings of details “Handle”, “Body”, “Branch pipe” in KOMPAS-3D: laboratory workshop on discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2016. 41 p.

9. Postroenie tverdotel’nykh modeley izdeliya «Prisposoblenie» i neobkhodimogo nabora konstruktorskikh dokumentov: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafi ka» [Construction of solid models of the product “Adaptation” and the required set of design documents: a laboratory workshop on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2017. 40 p.

10. Postroenie tverdotel’nykh modeley izdeliya «Ruchka» i neobkhodimogo nabora konstruktorskikh dokumentov: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafika» [Construction of solid models of the product “Pen” and the required set of design documents: a laboratory workshop on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2017. 50 p.

11. Postroenie tverdotel’noy modeli sborki izdeliya «Korpus v sbore» sposobom «snizu - vverkh» i neobkhodimogo nabora konstruktorskikh dokumentov na izdelie v KOMPAS-17: Laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafika» [Construction of a solid model of assembling the product “Casing assembly” in the manner of “bottom-up” and the required set of design documents for the product in KOMPAS-17: Laboratory workshop on discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2018. 54 p.

12. Postroenie tverdotel’noy modeli sborki izdeliya «Amortizator» sposobom «sverkhu - vniz» i neobkhodimogo nabora konstruktorskikh dokumentov na izdelie: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafi ka» [Construction of a solid model of the assembly of the product “Shock absorber” in the way “from top to bottom” and the necessary set of design documents for the product: a laboratory workshop on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2018. 54 p.

13. Sozdanie i redaktirovanie tverdotel’noy modeli detali tipa «telo vrashchenie» (val) s ispol’zovaniem bibliotek «Valy» i «Mekhanicheskie peredachi» 2D i 3D v sisteme KOMPAS-3D: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafi ka» [Creation and editing of the solid model of the “rotation body” type (shaft) using the “Shafts” and “Mechanical transmissions” libraries 2D and 3D in the KOMPAS-3D system: laboratory practical work on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2017. 36 p.

14. Sozdanie i redaktirovanie tverdotel’noy modeli detali «Koleso zubchatoe» s ispol’zovaniem bibliotek «Valy» i «Mekhanicheskie peredachi» 2D i 3D v sisteme KOMPAS-3D: laboratornyy praktikum po distsipline «Inzhenernaya i komp’yuternaya grafika» [Creation and editing of the solid model of the “Toothed wheel” part using the “Shafts” and “Mechanical transmissions” libraries 2D and 3D in the KOMPAS-3D system: a laboratory workshop on the discipline “Engineering and Computer Graphics”]. Ufa: RIK UGATU Publ., 2017. 38 p.

15. Sokolova L.S. Geometricheskaya podgotovka bakalavrov v sovremennykh usloviyakh [Geometrical preparation of bachelors in modern conditions]. Problemy kachestva graficheskoy podgotovki studentov v tekhnicheskom vuze: problemy, traditsii i innovatsii (KGP-2016): Materialy VI mezhdunarodnoy nauchno-prakticheskoy internet-konferentsii (fevral’ - mart 2016) [Problems of quality of graphic preparation of students in a technical university: problems, traditions and innovations (KGP-2016): Proceedings of the VI International Scientifi c and Practical Internet Conference (February - March 2016)]. Perm’: PNIPU Publ., 2016, I. 3, pp. 326-332.

16. Yakunin V.I., Guznenkov V.N. Geometro-grafi cheskie distsipliny v vuze: segodnya, zavtra [Geometrical-graphic disciplines in the university: today, tomorrow]. Vserossiyskoe soveshchanie zaveduyushchikh kafedrami inzhenerno-grafi cheskikh distsiplin tekhnicheskikh vuzov [All-Russian meeting of heads of the departments of engineering and graphic disciplines of technical universities]. Rostov-on-Don: DGTU Publ., 2015, pp. 192-198.

Login or Create
* Forgot password?