IMPACT OF CUTTING FORCE RADIAL COMPONENT AND TOOL MANDREL GEOMETRICAL PARAMETERS UPON ITS POSITION IN MACHINE SPINDLE
Rubrics: MECHANICAL ENGINEERING
Authors:
1.
Russian Federation
2.
Samara State Technical University
(Dep. “Engineering Technique, Machines and Tools", Associate Professor)
Samara, Samara, Russian Federation
Samara, Samara, Russian Federation
3.
Samarskiy gosudarstvennyy tehnicheskiy universitet
Russian Federation
Russian Federation
Type:
Article
Pages:
from 18
to 23
Status:
Published
Received:
06.02.2018
Accepted:
19.06.2018
Published:
19.06.2018
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
stanok, shpindel', instrumental'naya opravka, konechnoelementnaya model', pogreshnost', tochnost', uglovaya zhestkost'
Abstract (English):
Predstavleny rezul'taty issledovaniya tochnosti i uglovoy zhestkosti podsistemy «shpindel' - instrument» s ispol'zovaniem konechnoelementnoy modeli s uchetom pogreshnostey baziruyuschego konusa instrumental'nyh opravok i konstruktivnyh osobennostey. Predlozheny rekomendacii po vozmozhnosti ispol'zovaniya (v sluchae tehnologicheskoy neobhodimosti) poyaska na konicheskoy chasti opravki.
Predstavleny rezul'taty issledovaniya tochnosti i uglovoy zhestkosti podsistemy «shpindel' - instrument» s ispol'zovaniem konechnoelementnoy modeli s uchetom pogreshnostey baziruyuschego konusa instrumental'nyh opravok i konstruktivnyh osobennostey. Predlozheny rekomendacii po vozmozhnosti ispol'zovaniya (v sluchae tehnologicheskoy neobhodimosti) poyaska na konicheskoy chasti opravki.
Keywords:
stanok, shpindel', instrumental'naya opravka, konechnoelementnaya model', pogreshnost', tochnost', uglovaya zhestkost'
stanok, shpindel', instrumental'naya opravka, konechnoelementnaya model', pogreshnost', tochnost', uglovaya zhestkost'
1. Kazakova, O.Yu. Povyshenie tochnosti pri obrabotke zagotovok na stankah s ChPU / O.Yu. Kazakova, V.I. Petrunin, A.A. Kazakov // Naukoemkie tehnologii v mashinostroenii. - 2016. - №2 (56). - S. 44-48.
2. Kazakova, O.Yu. Povyshenie tochnosti obrabotki na stankah frezerno-sverlil'no-rastochnoy gruppy za schet minimizacii pogreshnostey instrumental'nyh sistem: dis. … kand. tehn. nauk / O.Yu. Kazakova. - Samara, 2013. - 182 s.
3. Levina, Z.M. Issledovanie zhestkosti konicheskih soedineniy / Z.M. Levina, A.A. Kornienko, A.G. Boym // Stanki i instrument. - 1973. - № 10. - S. 13-17.
