WIRES INTERWEAVING METHOD INFLUENCE ON WIRE GAUZE NETS’ HYDRAULICS
Abstract and keywords
Abstract (English):
In this paper have been analyzed various ways for wire gauze nets’ hydraulics presentation. Have been determined errors emerging when using the Darcy coefficient based on the channel model of nets’ internal structure. It has been proposed to consider all types of wire gauze nets as local resistances whose hydraulics are described by dependence of Euler criterion on Reynolds number, and to use a net cell as characteristic section. Based on analysis of filter gauze nets’ geometrical structure, have been defined analytical dependences for the nets’ cells area calculation allowing determine the nets’ clear gap size. As a result of experimental data processing by the specified technique has been established the influence of net’s wires interweaving type on Lagrange criterion value. The dependence for Lagrange criterion value calculation on porosity of filter serge unilateral nets has been proposed.

Keywords:
filter, metallic net, cell, porosity, hydraulic resistance, Euler criterion, Lagrange number.
Text

1. Введение в проблему
Надежность встроенных фильтров гидравлических систем машин и аппаратов в основном определяется характеристиками пористых материалов, используемых для изготовления фильтровальных перегородок.

References

1. Syritsyn T. A. Ekspluatatsiya i nadezhnost’ gidro- i pnevmoprivodov [Operation and reliability of hydro-pneumatic actuators]. Moscow, Mashinostroenie Publ., 1990. 248 p. (in Russian)

2. Shumilov I. S. Sistemy upravleniya rulyami samoleta [Steering wheel control systems]. Moscow, MGTU im. N. E. Baumana Publ., 2009. 469 p. (in Russian)

3. Timirkeev R. G. Promyshlennaya chistota i tonkaya fil’tratsiya rabochikh zhidkostey letatel’nykh apparatov [Industrial cleanliness and fine filtration of working fluids of aircrafts]. Moscow, Mashinostroenie Publ., 1986. 152 p. (in Russian)

4. Poristye pronitsaemye materialy [Porous permeable materials]. Moscow, Metallurgiya Publ., 1987. 335 p. (in Russian)

5. Pelevin F. V. Gidravlicheskoe soprotivlenie poristykh metallov [Hydraulic resistance of porous metals]. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Izvestiya Vysshikh Uchebnykh Zavedenii. Mechanical engineering]. 2016, I. 2, pp. 42–52. (in Russian)

6. Belov S. V., Devisilov V. A., Zhdanov V. N. Gidravlicheskoe soprotivlenie tkanykh metallicheskikh setok [Hydraulic resistance of woven metal nets]. Moscow, Khimicheskoe i neftyanoe mashinostroenie Publ., 1989, I. 8, pp. 26–28. (in Russian)

7. Al’tshul’ A. D. Gidravlicheskie soprotivleniya [Hydraulic resistance]. Moscow, Nedra Publ., 1982. 224 p. (in Russian)

8. ArmourJ. C., CannonJ. N. FluidflowthroughWovenScreens // AIChEJ. 1968. Vol. 14, I. 3. P. 415–420.

9. Spiridonov V. S., Novikov Yu. M., Bol’shakov V. A. Ekspluatatsionnye kharakteristiki fil’troval’nykh peregorodok iz provolochnykh setok s yacheykami mikronnykh razmerov [Performance characteristics of filter partitions made of wire mesh with micron-sized cells]. Bezopasnost’ v tekhnosfere [Safety in the technosphere]. 2013, V. 2, I. 6, pp. 52–57. DOI: 10.12737/2163 (in Russian)

10. Belov S. V. Raspredelenie geometricheskikh parametrov struktury po tolshchine poristykh setchatykh metallov [Distribution of geometrical parameters of the structure along the thickness of porous network metals]. Poroshkovaya metallurgiya [Powder metallurgy]. 1982, I. 3, pp. 68–72. (in Russian)

Login or Create
* Forgot password?