INFLUENCE EXTERNAL INFLUENCES ON THE ACCURACY OF TEMPERATURE CONCRETE FEATURES AND PERFORMANCE MEASUREMENT WITH INFRARED TECHNOLOGY IN THE AGING MONOLITHIC STRUCTURES
Abstract and keywords
Abstract (English):
At the present stage of technological development, where low labor intensity are highly valued, high efficiency and representativeness of measurements, a convenient means of storing and processing information, the infrared (IR) thermometry recaptures more and more space. The exact definition of the concrete temperature (with an error of 1 °C or less, usually defined by the sensor) is extremely complicated: Instrumental errors superimposed on the error measurement method used, on the errors associated with the arrangement of the measurement sites, etc. In relative terms, the rates of heating-cooling, in the absolute, the range of allowed temperatures when exposed concrete such accuracy looks obviously excessive and unjustified technically and economically. Considering the IR technique as a means postroechnyh control the concrete temperature, and when performing measurements using its implementation should be tailored to suit the IR measurements and factors that can lead to significant measurement errors. Since these factors can greatly affect the measurement result. Reliability indirect MOTB (method of determining the temperature of the concrete) with pyrometers is achieved by using the calculated accurate according to a certain type of decks and compliance with the measurement rules to ensure the work of this relationship within the allowable range of accuracy.

Keywords:
infrared technology, control concrete temperature, thermometer, thermal imager, temperature and strength control.
Text
Publication text (PDF): Read Download
References

1. Afanas´ev P.G. Inzhenernaya podgotovka zimnego betonirovaniya. Stroitel´naya gazeta. 2002. №41 (11 oktyabrya). S.5.

2. Volkov V.Yu. Issledovanie temperaturnykh raspredeleniy v stenovoy konstruktsii pri obogreve nagrevatel´nymi provodami: diss.... magistra; Moskva, MGSU, 2003. S. 422.

3. Gnyrya A.I. Teplozashchita betona mono-litnykh konstruktsiy v zimnee vremya: diss.... dokt. tekhn. nauk; Tomsk, TISI, 1992. S. 275.

4. Korobkov S.V. Teplo-i vlagozashchita betona pri vozvedenii monolitnykh zdaniy v zimnikh usloviyakh s primeneniem tunnel´noy opalubki: diss.... kand. tekhn. nauk; Tomsk, TGASU, 2001. S. 322.

5. Instruktsiya po primeneniyu khimicheskikh dobavok v betonakh i rastvorakh dlya sel´skogo stroitel´stva. OSN-APK 2.10.32.001-04. Moskva 2004.

6. Komissarov S.V. Sistema temperaturno-prochnostnogo monitoringa za sostoyaniem betona pri ustroystve monolitnykh konstruktsiy. Obespechenie kachestva nesushchikh konstruktsiy pri vsesezonnom monolitnom domostroenii: sb. statey po materialam seminara - soveshchaniya «Monolitnoe domostroenie: otechestvennaya i zarubezhnaya opalubka, sposoby vedeniya rabot»; Moskva, 20 aprelya 2000g. / Pravitel´stvo Moskvy, Moskovskaya litsenzionnaya palata, GU «Mos-stroylitsenziya». M., 2000.

7. Pribytkov I.A. Teoreticheskie osnovy teplotekhniki. M.: Akademiya, 2004. 464 s.

8. Remeyko O.A. Tekhnologicheskoe sopro-vozhdenie vsesezonnogo monolitnogo stroitel´stva. Obespechenie kachestva nesushchikh konstruktsiy pri vsesezonnom monolitnom domostroenii: sbornik statey po materialam seminara soveshchaniya «Monolitnoe domostroenie: otechestvennaya i zarubezhnaya opalubka, sposoby vedeniya rabot»; Moskva, 20 aprelya 2000g. / Pravi-tel´stvo Moskvy, Moskovskaya litsenzionnaya palata, GU «Mosstroylitsenziya». Moskva, 2000.

9. Rymarov A.G. Izmenenie koeffitsienta teplootdachi na naruzhnoy poverkhnosti ograzhdayushchikh konstruktsiy vysotnogo zdaniya v kholodnyy period. Montazhnye i spetsial´nye raboty v stroitel´stve. 2006. -№1. S. 14-16.

10. Solomatov V.I. Osobennosti zavisimosti prochnosti betona ot aktivnosti i raskhoda tsementa. Beton i zhelezobeton. 1999. -№2. S. 22-23.

11. Titasv V.A. Prognozirovanie prochnosti betona na osnove dannykh temperaturnogo kontrolya. Tekhnologii betonov: 2007. №3(14). S.66-67.

12. Rekomendatsii po elektroobogrevu monolitnogo betona i zhelezobetona nagrevatel´nymi provodami. M.: TsNIIOMTP, 1989.

13. Mar´yamov N.B. Teplovaya obrabotka izdeliy na zavodakh sbornogo zhelezobetona. M.: Stroyizdat, 1970. 137 s.

14. SP 52-101-2003 Betonnye i zhelezobetonnye konstruktsii / GUL NIIZhB Gosstroya Rossii. Moskva, 2004. 59 s.

15. GOST 10181-2000 Smesi betonnye. Metody ispytaniy / NIIZhB Moskva, 2001. 23 s.

16. SP 70.13330.2012 Nesushchie i ograzhdayushchie konstruktsii / TsNIIPSK im. Mel´nikova. M., 2012. 923 s.

17. Malhotra, V.M. In-place evaluation of concrete. Journal of Construction Division, Proceedings of American Society of Civil Engineers. -1975. Vol.101. P.23-26.

18. Guide to Formwork for Concrete / Reported by ASI. Gommitee 347, American concrete institute, 1994. 34 pags.


Login or Create
* Forgot password?