DEVELOPMENT OF A DESIGN TOOL FOR THE ANODE-MECHANICAL HONING HOLES.
Rubrics: MECHANICAL ENGINEERING AND TRANSPORT
Authors:
3.
Institute of Design and Engineering Informatics of the Russian Academy of Sciences
(Leading Researcher)
Russian University of Transport (MIIT) (Department of Technology of Transport Engineering and Repair of Rolling Stock, Professor)
Moscow, Moscow, Russian Federation
Russian University of Transport (MIIT) (Department of Technology of Transport Engineering and Repair of Rolling Stock, Professor)
Moscow, Moscow, Russian Federation
Type:
Article
Pages:
from 42
to 43
Status:
Published
Received:
07.12.2016
Accepted:
07.12.2016
Published:
07.12.2016
Language:
Russian
Keywords:
anode-mechanical honing, hone, quality assurance, roughness, surface treated.
Abstract (English):
This article discusses the design khon providing efficiency anode-mechanical precision honing holes, ways to improve productivity and quality of machined surfaces for honing holes.
This article discusses the design khon providing efficiency anode-mechanical precision honing holes, ways to improve productivity and quality of machined surfaces for honing holes.
Keywords:
anode-mechanical honing, hone, quality assurance, roughness, surface treated.
anode-mechanical honing, hone, quality assurance, roughness, surface treated.
1. Podurayev, V. N. Cutting of the heavy-duty materials / V. N. Podurayev. - M.: Higher School, 1974. - 588 p.
2. Mo, Naing U. Increasing the effectiveness of anodic mechanical processing of the external cylindrical and threaded surfaces of details of silumins by the edge cutting machines /Naing U. Mo. - M, 2014.-156 p.
