STUDY OF THE MECHANICAL AND PHYSICAL PROPERTIES OF HARD ALLOY VK20
Rubrics: MECHANICAL ENGINEERING AND TRANSPORT
Authors:
2.
Bryanskiy gosudarstvennyy tehnicheskiy universitet
(Mashinostroenie i materialovedenie, docent)
3.
Bryansk State Technical University
(Department of Mechanical Engineering and Materials Science, Professor)
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Type:
Article
Pages:
from 57
to 61
Status:
Published
Received:
01.12.2016
Accepted:
02.12.2016
Published:
02.12.2016
Language:
Russian
Keywords:
hard alloy, stamped, planting, density, hardness, technique.
Abstract (English):
The article presents the results of research for upsetting tool inserts made of hard alloy VK-20 different manufacturers. All studies were performed according to standard procedures using cer-tified equipment. The results showed that the majority of the inserts (80%) did not meet the re-quirements of GOST 3882-74 for a hard alloy VK20
The article presents the results of research for upsetting tool inserts made of hard alloy VK-20 different manufacturers. All studies were performed according to standard procedures using cer-tified equipment. The results showed that the majority of the inserts (80%) did not meet the re-quirements of GOST 3882-74 for a hard alloy VK20
Keywords:
hard alloy, stamped, planting, density, hardness, technique.
hard alloy, stamped, planting, density, hardness, technique.
1. Kiffer, R. Hard alloys: [transl. from Deutch] / R. Kiffer, F. Benezovsky. - M.: Metallurgy, 1971. - 392 p.
