In the work on the basis of Darcy equations defining lubricant flow in porous layers, and of Reynolds modified equation the problem of an unsteady motion of viscous incompressible lubricant in the gap of a por-ous damper is under solution. A case is under consideration when a forced lubricant supply is carried out in circumferential and radial directions taking into account the influence of orthogonal anisotropy of a porous layer. As a result of the solution of the problem specified there is found a field of pressures in a porous and lubricating layer, and analytical dependences for efforts in an oil film are obtained. Besides, there is defined a module of an unbalance transmitted effort and also stationary and transient ratios of transfer. It is proved that at the forced lubricant feed in a circumferential or radial direction taking into account the influence of orthogonal anisotropy of a porous layer, a damper functions more steadily. The obtained specified calculated models al-lowed defining a number of supplementary factors and also carrying out a comparative analysis of results newly obtained and already existing ones. It confirmed a larger proximity of a new model an actual practice.
hydrodynamics, finite-dimensional damper, lubricant forced feed, porous ring, anisotropy of penetrability in radial direction
1. Conry, C. On stability of porous journal bearings / C. Conry, C. Cusano // Design & Engineering Techniques. - 1974. - № 2. - pp. 206-216.
2. Akhverdiev, К.S. On stability of doublelayer por-ous radial bearings / К.S. Akhveriev, О.V. Mulenko // Bulletin of RSIVS. - 2002. -№ 3 - pp. 5-7.
3. Hydrodynamic computation of doublelayer porous radial infinite bearing taking into account anisotropy of porous layer permeability and inertia / К.S. Akhverdiev, М.А. Mukutadze, V.S. Novgorodova, Т.S. Cherkasova // Bulletin of DSTU. - 2013. - № 5/6(74). - pp. 36-43.
4. Cusano, C. Investigation of transfer coefficient in resilient rolling bearing in damper with squeezed film and porous cage / C. Cusano, Р.Е. Funk // Problems of Friction and Lubrication : Proceedings of American Society of Mechanical Engineers - 1977. - № 1. - pp. 54-61.
5. Hydrodynamic computation of radial porous infinite bearing with increased load-carrying capacity taking into account inertia / М.А. Mukutadze, Е.Е. Alexandrova, А.А. Konstantinov, А.I. Shevchenko // Bulletin of RSUC. - 2012. - № 2(46). - pp. 194-197.
6. Zadorozhnaya, E.A. Solving a thermohydrodynamic lubrication problem for complex-loaded sliding bearings with allowance for rheological behavior of lubricating fluid / E.A. Zadorozhnaya // Journal of Machinery Manufacture and Reliability, 2015. - No44(1), pp. 46-56.
7. Rozhdestvensky, Y. A simulation of the thermal state of heavily loaded tribo-units and its evaluation / Y. Rozhdestvensky, E. Zadorozhnaya // Bulletin of the South Ural State University, Series: Mathematical Modeling, Programming and Computer Software, 2014. - No 7(4), pp. 51-64.
8. Tolpinskaya, N.B. Porous Finite Bearing with Lubrication Feed through Bearing Insert Pores: Thesis for Can.Eng. Degree competition / N.B. Tolpinskaya. - Rostov-uon-Don, 1986. - pp. 20-40.
9. Rahmatabadi, A.D. Micropolar lubricant effects on the performance of noncircular lobed bearings / A.D. Rahmatabadi, M. Nekoeimehr, R. Rashidi // Tribology International. - 2010. - Vol. 43. - P. 404-413.
10. Akhverdiev, К.S. Transient simulator of hydrody-namic lubrication for complexloaded compound tapered bearing with porous layer on its working surface taking into account its design peculiarities / К.S. Akhverdiev, S.F. Kochetova, М.А. Mukutadze // Bulletin of RSUC. - 2009
