With blunt disks above the permissible thickness of the blades removed and sharpened with the formation of the nominal geometry of the cutting edge. The diameter of the discs de-creases. When you restore a disk of the working bodies can also produce their hardening, using: hard and wear-resistant materials, chemical heat treatment (boriding), the hardening by a method of electrical discharge machining, the application of polymeric and composite materials, cladding wear tape, the hardening by rolling.
spherical disk, the angle of taper, blade thickness, manufacturing technology, wear behavior, wear resistance, durability.
1. Kozhuro, L.M. Tekhnologiya sel´skokhozyaystvennogo mashinostroeniya [Elektronnyy resurs]: kurs lektsiy / L.M. Kozhuro. - Minsk: 2005. - 414 c. Rezhim dostupa: http://www.batu.edu.by/publication/tekhnologiya-selskokhozyaistvennogo-mashinostroeniya-kurs-lektsiil-m-kozhuro
2. Khrushchov, M.M. Abrazivnoe iznashivanie [Tekst] / M.M. Khrushchov, M.A. Babichev. - M.: Nauka, 1970. - 252 s.
3. Bowden, F.R. The Friction and Lubrication of Solids [Text] / F.R. Bowden, D. Tabor. - Oxford University Press, 2001. - 424 r.
4. Shovkoplyas, A.V. Analiz prichin iznashivaniya diskovykh rabochikh organov i modeley izmeneniya svoystv pochvy pod ikh deystviem [Tekst] / A.V. Shovkoplyas. Vestnik nauki i obrazovaniya Severo-zapada Rossii. Pervaya mezhdunarodnaya nauchno-prakticheskaya konferentsiya «Innovatsii v nauke, proizvodstve i obrazovanii». Tekhnicheskie nauki. Promyshlennye tekhnologii. - Kaliningrad, 2015. - T. 1. - №3. - S. 1-8. - Rezhim dostupa: http://vestnik-nauki.ru/wp-content/uploads/2015/ 12/2015-№3-Shovkoplyas.pdf.
5. Voloshko, N.I. Rezul´taty polevykh opytov po issledovaniyu iznosa sfericheskikh diskov [Tekst] / N.I. Voloshko, A.F. Zagoruyko. Trudy Azovo-Chernomorskogo instituta mekhanizatsii sel´skogo khozyaystva. - Rostov, 1970. - №21. - S. 250-251.
6. Sablikov, M.V. Sel´skokhozyaystvennye mashiny. Osnovy teorii i tekhnologicheskogo rascheta [Tekst] / M.V. Sablikov. - M.: Kolos, 1968. - 296 s.
7. Bykov, V.F. Issledovanie ekspluatatsionnoy nadezhnosti mashin lesnogo kompleksa [Tekst] / V.F. Bykov / Vklad uchenykh i spetsialistov v natsional´nuyu ekonomiku. Sbornik nauchnykh trudov. - Bryansk: BGITA, 2006. - 380 s.
8. Kolpakov, A.V. Tekhnologiya uprochneniya rabochikh organov pochvoobrabatyvayushchikh ma-shin [Tekst] / A.V. Kolpakov. Vestnik FGOU VPO MGAU im. V. P. Goryachkina. - M.: 2009. - №4. - S. 54-56.
9. Sidorov, S.A. Sovershenstvovanie konstruktsii i uprochnenie diskovykh rabochikh organov [Tekst] / S.A. Sidorov. Mekhanizatsiya i elektrifikatsiya sel´skogo khozyaystva. - M.: 2003. - №8. - S. 30-32.
10. Shitov, A.N. Vliyanie razlichnykh faktorov na iznashivanie rabochikh organov pochvo-pochvoobrabatyvayushchikh mashin [Tekst] / A.N. Shitov, A.A. Vedeneev. Remont, vosstanovlenie, modernizatsiya. - 2002. - №7. - S. 21-23.
11. Kanivets, A.V. Izmenenie parametrov diskov soshnikov pri ikh vosstanovlenii [Tekst] / A.V. Kanivets. Vestnik Natsional´nogo tekhnicheskogo universiteta «KhPI». - Khar´kov, 2011. - №10. - S. 38-41.
12. Blednykh, V.V. Ustroystvo, raschet i proektirovanie pochvoobrabatyvayushchikh orudiy [Tekst] : uchebnoe posobie / V.V. Blednykh. - Chelyabinsk: ChGAA, 2010. - 203 s.
13. Sokht, K.A. Diskovye borony i lushchil´niki. Proektirovanie tekhnologicheskikh pa-rametrov [Tekst]: uchebnoe posobie / K.A. Sokht, E.I. Trubilin, V.I. Konovalov. - Krasnodar: KubGAU, 2014 - 164 s. - Rezhim dostupa: http://www.kubsau.ru/upload/iblock/3ed/ 3ed5134865100667522daf24a5faacaf.pdf
