Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
UDC 621.2.082.18
Russian Library and Bibliographic Classification 344
The procedure for determining the parameters of the contact interaction of rough surfaces is considered. At low loads, there is a discrete contact in which there is no mutual influence of loaded neighboring irregularities. The fractal approach proves to be the most effective for quantifying the contact interaction parameters of rough surfaces. The study objective: to evaluate the effect of surface roughness on the functional properties of the contact. The task to which the paper is devoted: to estimate the actual contact area of rough surfaces. Research methods: computer simulation of rough surfaces and their contact. The novelty of the work: the fractal dimension DXY is found, characterizing the dimensional distribution of the cut-off areas of irregularities. Research results: it is possible to estimate the parameters of the contact interaction of rough surfaces under the conditions of plastic and elastic state of loaded irregularities. Conclusions: correct assessment of FPC requires consideration of a number of parameters that determine both the roughness and the features of the fractal structure of the surface.
dimension, distribution, area, cut, irregularity, contact, roughness, surface
1. Li J, Tang Y, Li Z, Ding X. Study on the optical performance of thin-film light-emitting diodes using fractal micro-roughness surface model. Applied Surface Science. 2017;140:60-69.
2. Zheng W, Sun J, Ma Yu. Interface leakage theory of mechanical seals considering microscopic forces. Coatings [Internet]. 2023;1-19. Available from: https: \\ www.mdpi.com/Journal\Coatings
3. Zhao Y, Yang C. Stiffness and damping model of bolted joints with uneven surface contact pressure distribution. Strojniški vestnik - Journal of Mechanical Engineering. 2016;62:665-677.
4. Majumdar A, Bhushan B. Role of fractal geometry in roughness characterization and contact mechanics of surfaces. Trans. ASME: J. Tribology. 1990;112:205-216.
5. Zhang X, Wang N, Lan G, Wen S, Chen Y. Tangential Damping and its Dissipation Factor Models of Joint Interfaces Based on Fractal Theory with Simulations. Journal of Tribology. 2014;136:1-10.
6. Kragelsky IV, Dobychin MN, Kombalov BC. Fundamentals of calculations for friction and wear. Moscow: Mashinostroenie; 1977.
7. Chichinadze AV, Brown ED, Boucher NA. Fundamentals of tribology. Friction, wear, lubrication: textbook for technical universities. 2nd ed. Moscow: Mashinostroenie; 2001.
8. Majumdar A, Bhushan B. Fractal model of elastic–plastic contact of rough surfaces. Modern Mechanical Engineering. 1991;6:11-23.
9. Abbott EJ, Firestone FA. Specifying surface quality. Mech Eng. 1933:572.
10. GOST R ISO 4287-2014. Geometrical Product Specifications (GPS). Surface texture. Profile method. Terms, definitions and surface texture parameters. Moscow: Standartinform; 2019.
11. Musokhranov MI, Marochkin VV. Numerical method for calculating the parameters of Abbott–Firestone curve. StudNet. 2022;4:2499-2509.
