employee
Gubkin, Belgorod, Russian Federation
Gubkin, Belgorod, Russian Federation
UDC 621.791.763.2
Russian Library and Bibliographic Classification 344
The use of resistance welding in the field of mechanical engineering is considered, its advantages are highlighted, which contribute to an increase in production efficiency. The abundence of threaded connections in modern mechanisms and the expediency of their integration into stamped elements are noted. Welding of M6 nut with four projections to a sheet part is demonstrated as an example. The equipment guaranteeing preservation of exact sizes of a product is described. The potential difficulties that may arise during welding and negatively affect the quality of the final product and the safety of workers are analyzed. The parameters affecting welding stability are studied. The welding cycle and welding parameters are selected for a specific situation, detailing the effect of each parameter on the welding process.
welding, parameters, sequence, intense splashing, strength, metal ejection, resistance
1. Ababkov NV, Pimonov MV. Technology and equipment of contact welding: textbook. Kemerovo: KuzSTU; 2011.
2. Bulychev VV, Zybin IN, Paramonov S S. Study of relief welding process of nuts to galvanized sheet steel. Blanking Productions in Mechanical Engineering. 2019;17(10):441-445.
3. Vakatov AV. Features of the formation of welded joints during contact spot welding of galvanized steel. Svarochnoe Proizvodstvo. 2001;2:20-21.
4. Gillevich VA. Technology and equipment of projection welding. Leningrad: Mashinostroenie; 1976.
5. Gulyaev AI. Technology and equipment of contact welding. Moscow: Mashinostroenie; 1985.
6. Kataev RF, Milyutin VS, Bliznik MG. Theory and technology of contact welding: textbook. Yekaterinburg: Publishing House of Ural University; 2015.
7. Middeldorff KD. Trends in the development of technologies for joining materials. Collection of Plenary Reports of the International Conference, 2008: Welding and Related Technologies - into the Third Millennium.
8. Nenarokomov GK. On the features of contact spot welding of galvanized parts. Actualnye Problemi Gumanitarnyh I Estestvennih Nauk. 2017;5-1:56-60.
9. Polyakov AYu, Furmanov SM, Berezienko VP, Lyalikhov SI. Optimization of the amount of energy injected into the projection welding zone of batch joints. Bulletin of Belarusian-Russian University. 2012;2:67-77.
10. Paramonov SS, Maksimov NN. Features of projection welding of fasteners. Science, Technology and Education. 2017;SV3 (15):5-10.
11. Pietras A, Papkala H. Spot welding of galvanized sheet materials in mass production. Proceedings of the II International Simposium, 2001: Welding and Related Technologies: World Experience and Achievements; Minsk: 2001. p. 63-71.
12. Polyakov AYu. Development of the manufacturing process of resistance projection welding of package joining of locks deadbolts. Bulletin of Belarusian-Russian University. 2014;3(44):56-67.
13. Polyakov AYu. Reducing the energy intensity of resistance projection welding processes: monograph. 2nd ed. Moscow, Vologda: Infra-Engineering; 2020.
14. Smirnov VV, editor. Equipment for contact welding: reference manual. Saint Petersburg: Energoatomizdat; 2000.
15. Chularis AA, Rogozin DV. Technology of pressure welding: textbook for universities. Rostov-on-Don: Phoenix; 2006.
