Analyzed the main reasons for rejection of body parts of automotive engineering, as well as ways to restore the number of holes. The technological aspects of improving recovery efficiency number of holes in the body parts of transmissions of automotive engineering.The technological equipment, including gauge-based cutter and detail, allows you to calibrate the holes mechanically with polymer coating and improve the accuracy of the size of these holes.
accuracy, housing part, hole, elastomer, an elastomer coating, calibration
1. R. I. Li, M. A. Shipulin. Evaluative quality parameters in nondestructive control of adhesive metallic bonds in machine unit. ISSN 1995_4212, Polimer Science, Series D. Glues and Sealing Materials, 2012, Volume 5, Number 1, pp. 15-19.
2. Li, R.I. Primenenie polimernykh materialov v podshipnikovykh uzlakh pri izgotovlenii i remonte mashin [Tekst]: monografiya / R.I. Li. - Michurinsk: Izdatel´stvo MichGAU, 2010 - 169 s.
3. Zhachkin, S.Yu. Vosstanovlenie detaley mashin kompozitnym khromovym pokrytiem: monografiya / S.Yu. Zhachkin. Voronezh: GOUVPO «Voronezhskiy gosudarstvennyy tekhnicheskiy universitet», 2009. 177 s.
4. Kolomeichenko A.V., Kuznetsov I.S., Kravchenko I.N. Investigation of the thickness and microhardness of electrospark coatings of amorphous and nanocrystalline alloys / Welding International. 2015. T. 29. № 10. S. 823-825.
5. Kononenko, A. S. Povyshenie nadezhnosti nepodvizhnykh flantsevykh soedineniy sel´skokhozyaystvennoy tekhniki ispol´zovaniem nanostrukturirovannykh germetikov [Tekst]: dis... dokt. tekhn. nauk. / Kononenko A. S. - M., 2012, - 405 s.
6. Lazernaya naplavka pri vosstanovlenii poverkhnostey kulachkovykh valov [Tekst] / Savchenko P. V., Ablaev A. A.. Al´ternativnye istochniki energii v transportno-tekhnologicheskom komplekse: problemy i perspektivy ratsional´nogo ispol´zovaniya. 2014. № 1. s. 133-137.
7. Li, R. I. Tekhnologicheskie aspekty povysheniya effektivnosti vosstanovleniya korpusnykh detaley avtotraktornoy tekhniki elastomerami [Tekst] / Li R. I., Kirsanov F. A.. Trudy GOSNITI. - M.: Izd-vo GOSNITI, 2014. - T. 114. - S. 100-103;
8. Aristov, A. I. Metrologiya, standartizatsiya i sertifikatsiya [Tekst] / Aristov A. I., Karpov L. I., Prikhod´ko V. M., Rakovshchik T. M.; - M.: Akademiya, 2006. - 384 s.
9. Butin, A. V. Povyshenie effektivnosti vosstanovleniya nepodvizhnykh soedineniy podshipnikov kacheniya sel´skokhozyaystvennoy tekhniki polimer-polimernymi kompozitsiyami [Tekst]: dis.... kand. tekhn. nauk / Butin A. V. - Michurinsk, 2012. - 127 s.
10. Shtuchnyy, B. P. Mekhanicheskaya obrabotka plastmass [Tekst]: Spravochnik / Shtuchnyy B. P.; - M.: Mashinostroenie, 1987. - 152 s.
