Taganrog, Rostov-on-Don, Russian Federation
A basic problem in current mechanical engineering consists in manufacturing long-lived, reliable and competitive products. One of factors meeting these requirements is manufacturing parts with high servicing characteristics. In spite of that today there is a large number of various methods for product finishing the routine method in our country and abroad is an abrasion, and, in particular - grinding. As a result of theoretical and experimental re-searches carried out there is solved a significant scien-tific problem having a considerable production and economical importance for an engineering technique there are developed and investigated methods for effectiveness increase in grinding part surfaces made of highalloy and heatresistant materials through changes in design and structure of abrasive tools. For the first time theoretically and experimentally there was proved a possibility of use chromium diiodide in the composition of mass for abrasive tool manufacturing with the aid of which films are formed ensuring lowering the temperature by 20-30 % in the area of grinding.
abrasive disk, filmforming materials, abrasive mass, constant of friction, burns, surface layer, part, roughness.
1. Fury, M.J., Iodine effect at obtaining low friction value / M.J. Fury // Wear. - 1965. - Vol. 9. - No 5. - pp. 18-23.
2. Reznikov, A.N., Thermal physics of processes in material machining / A.N. Reznikov. - M.: Mechanical Engineering, 1981. - pp. 279.
3. Mass for abrasive tool manufacturing: pat. 2392109 RF: B24D 3/28 / Butenko V.I., Durov D.S., Fomenko Е.S., Gusakova L.V. Appl. 24.12.08; published. 20.06.10, Bulletin № 17.
4. Butenko, V.I., Iodine effect in abrasive disk structure upon contact temperature at part machining / V.I. Butenko, L.V. Gusakova // Current problems in mechanics and its teaching in colleges: Proceedings of the IV-th All-Russian Conference-Seminar of Heads of Departments and Senior Lecturers on Engineering Mechanics in Colleges of the RF (Novocherkassk, September 21-24, 2010). - Novocherkassk: SRSTU, 2010. - pp. 32-35.
