employee
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
employee
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
UDC 621.9
Russian Library and Bibliographic Classification 345
The study objective is to define the rational parameters of the cutting mode with a special SKIF-M interlocking side mill for superhard (HRC 65 and more) surfacing. The study results: the rational application of an interlocking side mill in comparison with monolithic carbide end mills is shown, the area of rational parameters of the cutting mode with this mill is defined. It is also found out that the most rational use of this mill is at a cutting speed of 50 m/min, a cutting depth of 2 mm and a feed per milling tooth of 0.05 mm. It is shown that increasing the cutting speed, cutting depth, or feeding to the tooth is irrational. Conclusions: 1. The goal was achieved by experimentally examining the mill operability according to the wear resistance period of 0.5 mm under different operating conditions. 2. It is found out that the durability period decreases significantly with increasing cutting depth and becomes critical at cutting depth of 3 mm. The novelty of the work: the areas of rational use of a special SKIF-M mill for machining surfacing of HRC 65 and more have been established.
surfacing, machining, operation, mill, research, production
1. Kirichek AV, Solovyov DL, Lazutkin AG. Technology and equipment of static pulse treatment by surface plastic deformation: technologist's library. Moscow: Mashinostroenie; 2004.
2. Lazutkin AG, Kirichek AV, Stepanov YuS, Solovyov DL. Mechanics of surface loading by a deformation wave. Moscow: Mashinostroenie; 2005.
3. Mokritskii BYa, Shelkovnikov VYu. Blade machining of workpieces of the details, that have strengthening by high hardness surfacing. Metalworking. 2021;2:3-7. DOIhttps://doi.org/10.25960/mo.2021.2.3.
4. Mokritskiy BYa. A tool for milling workpieces with high hardness surfacing. Metalworking. 2021;5-6:3-9. DOIhttps://doi.org/10.25960/mo.2021.5-6.3.
5. Grigoriev S, Vereschaka A, Milovich F, Tabakov V, Sitnikov N, Andreev N, Sviridova T, Bublikov J. Investigation of muticompont nanolayer coatings baseton nitrides of Cr, Mo, Zr, Nb and Al. Surface and Coating Technology. 2020;401:Art.No.126258. DOI:https://doi.org/10.3390/coatings10121236.
6. Grigoriev SN. Methods of increasing the durability of cutting tools. Moscow: Mashinostroenie; 2011.
7. Huajie Ch, Aihui Zh. Orbital-free density functional theory for molecular structure calculations. Numerical Mathematics: theory, methods applications. 2008;1:1-28.
8. Barbyshev BV, Putilova US, Nekrasov RYu. Mechanics of deformation and fracture during cutting. Non-stationary cutting process. Tyumen: Tyumen State University; 2012.
