DEVICES FOR TESTING OF THE FRICTION WITH THE BEARING FROM THE MODIFIED WOOD
Abstract and keywords
Abstract (English):
Setting for research combined effect of heat and cold on the performance of the modified wood bearings with automatic control units has been presented. It allows testing of the bearing with variable sliding speeds (60 to 760 rev / min) and loads (300 to 3000 kgf) in different environments and under dif-ferent temperature and humidity of the ambient air parameters. Kinematics of the test device with a de-tailed description of the device and the principle of work has been shown. The technical characteristics of the apparatus of heat - cold has been presented.

Keywords:
modified wood, bearing, researches, laboratory apparatus.
References

1. Aksenov, A.A. Tverdost´ i deformatsii pressovannoy drevesiny pri otritsatel´nykh temperaturakh [Tekst] / A.A. Aksenov, S.V. Malyukov. Lesotekhnicheskiy zhurnal. - 2014. - T.4. - № 3 (15). - S. 184-192. DOI:https://doi.org/10.12737/6286

2. Aksenov, A.A. Vliyanie otritsatel´nykh temperatur i stepeni uplotneniya na tver-dost´ pressovannoy drevesiny [Tekst] / A.A. Aksenov, S.V. Malyukov. Fundamental´nye issledovaniya. - 2015. - № 5-1. - S. 9-13.

3. Al-Haddad, J.M. Chemical responses to modified lignin composition in tension wood of hybrid poplar (populus tremula × populus alba) [Text] / J.M. Al-Haddad, F.W. Telewski, K.-Y. Kang, S.D. Mansfield. Tree Physiology. - 2013. - Vol. 33. - no. 4. -pp. 365-373. - DOIhttps://doi.org/10.1093/treephys/tpt017

4. Shamaev, V.A. Podshipniki skol´zheniya iz modifitsirovannoy drevesiny [Tekst] / V.A. Shamaev. Vestnik mashinostroeniya. - 2010. - № 7. - S. 45-49.

5. Shamaev, V.A. Khimiko-mekhanicheskoe modifitsirovanie drevesiny [Tekst] : monogra-fiya / V.A. Shamaev. - Voronezh, 2003. - 260 s.

6. Grelier, S. Use of low molecular weight modified polystyrene to prevent photodegradation of clear softwoods for outdoor use [Text] / S. Grelier, A. Castellan, L. Podgorski. Polymer Degradation and Stability. - 2007. - Vol. 92. - no. 8. - pp. 1520-1527. - DOI:https://doi.org/10.1016/j.polymdegradstab.2007.05.011

7. Belokurov, V.P. Termo-vlagouprugost´ podshipnikov skol´zheniya iz DM pri ispol´zovanii zadachi Lame [Tekst] / V.P. Belokurov. Lesotekhnicheskiy zhurnal. - 2015. - T. 5. - № 2. - S. 104-110. - DOI:https://doi.org/10.12737/111984

8. Duanmu, J. Hygromechanical properties of composites of crosslinked allylglycidyl-ether modified starch reinforced by wood fibres [Text] / J. Duanmu, E.K. Gamstedt, A. Rosling. Composites Science and Technology. - 2007. Vol. 67. - no. 15-16. - pp. 3090-3097. - DOI:https://doi.org/10.1016/j.compscitech.2007.04.027

9. Shamaev, V.A. Pressovannaya drevesina v mashinostroenii [Tekst] : spravochnik / V.A. Shamaev, A.I. Smolyakov, P.A. Smirnov [i dr.]. - Voronezh, 2005. - 92 s.

10. Temiz, A. Effect of accelerated weathering on surface chemistry of modified wood [Text] / A. Temiz, N. Terziev, M. Eikenes, J. Hafren. Applied Surface Science. - 2007. - Vol. 253. - no. 12. - pp. 5355-5362. - DOI:https://doi.org/10.1016/j.apsusc.2006.12.005


Login or Create
* Forgot password?