Journals Monographies Textbooks Collections Authors
Submit manuscript
Modern methods of cutting of sheet materials
Submit manuscript
To cite
Citations:

MODERN METHODS OF CUTTING OF SHEET MATERIALS
Shabanov M. 1
Lysych Mikhail Nikolaevich 2
Miltsin Aleksandr Nikolaevich 3
Romanov V.
Authors:
1.  Federal State Budget Education Institution of Higher Education «Voronezh State University of Forestry and Technologies named after G.F. Morozov» (Forest Industry, Metrology, Standardization and Certification department, docent)

Voronezh, Voronezh, Russian Federation
2.  Voronezh State University of Forestry and Technologies named after G.F. Morozov (kafedra lesnoy promyshlennosti, metrologii, standartizacii i sertifikacii, starshiy prepodavatel')

Voronezh, Voronezh, Russian Federation
3.  Voronezh State University of Forestry and Technologies named after G.F. Morozov

Voronezh, Russian Federation
Type:
Article
DOI:
https://doi.org/10.12737/10026
Pages:
from 83 to 87
Status:
Published
Received:
17.03.2015
Accepted:
17.03.2015
Published:
17.03.2015
Language:
Russian
Keywords:
sheet materials, cutting, technologies, the equipment, cost
Abstract and keywords
Abstract (English):
classification of technologies of cutting of sheet materials is resulted. On each of technologies (laser cutting, plasma cutting, hydroabrasive cutting, milling and oxygen cutting) the short description is given, the spectrum of processed materials and their maximum thickness is analyzed. On the basis of the spent analysis cost comparison is made are sharp sheet materials with use of various technologies and the conclusion about areas of their applicability is made.

Keywords:
sheet materials, cutting, technologies, the equipment, cost
Text

УДК 621.9

СОВРЕМЕННЫЕ МЕТОДЫ РЕЗАНИЯ ЛИСТОВЫХ МАТЕРИАЛОВ

MODERNMETHODSOFCUTTINGOFSHEETMATERIALS

Мильцин А.Н.,к.т.н., доцент

Шабанов М.Л., к.т.н., доцент

Лысыч М. Н.,к.т.н., старший преподаватель

Романов В.В., студент

ФГБОУ ВПО «Воронежская государственная лесотехническая академия»

г. Воронеж, Россия

DOI: 10.12737/10026

 

Аннотация:приводится классификация технологий резания листовых материалов. По каждой из технологий (лазерная резка, плазменная резка, гидроабразивная резка, фрезерование и газокислородная резка) дается краткое описание, анализируется спектр обрабатываемых материалов и их максимальные толщины. На основе проведенного анализа произведено сравнение стоимости резки листовых материалов с использованием различных технологий и сделано заключение об областях их применимости.

Summary: classification of technologies of cutting of sheet materials is resulted. On each of technologies (laser cutting, plasma cutting, hydroabrasive cutting, milling and oxygen cutting) the short description is given, the spectrum of processed materials and their maximum thickness is analyzed. On the basis of the spent analysis cost comparison is made are sharp sheet materials with use of various technologies and the conclusion about areas of their applicability is made.

Ключевые слова: листовые материалы, резание, технологии, оборудование, стоимость

 

Keywords: sheet materials, cutting, technologies, the equipment, cost

References

1. Kislorodnaya rezka metalla [Elektronnyy resurs] / http://www.spmet.ru/services/gazovaya_rezka_metalla/Zagl. s ekrana. (data obrashcheniya: 27.12.2014)

2. Lazernyy stanok [Elektronnyy resurs] / http://www.yusto.ru/katalog/lazernye-stanki/laser-hsg-hs-z1390m-detail/#vm_infoZagl. s ekrana. (data obrashcheniya: 27.12.2014)

3. Lazernaya obrabotka metallov [Elektronnyy resurs] / http://lazer-center.ru/priceZagl. s ekrana. (data obrashcheniya: 27.12.2014)

4. Sistemy plazmennoy rezki GAMMATEC [Elektronnyy resurs] / http://www.koike.nl/ru/products/datasheet/gammatec/Zagl. s ekrana. (data obrashcheniya: 27.12.2014)

5. Stanok gidroabrazivnoy rezki Flow MACH 3 [Elektronnyy resurs] / http://www.tkzentrum.ru/equipment/flow/item65/item66/Zagl. s ekrana. (data obrashcheniya: 27.12.2014)

6. Stanki gazovoy rezki s ChPU [Elektronnyy resurs] / http://stanki-tvm.ru/produkciya/stanki-gazovoy-rezki-s-chpuZagl. s ekrana. (data obrashcheniya: 27.12.2014)

7. Tekhnologiya konstruktsionnykh materialov. Uchebnik dlya mashinostroitel´nykh spetsial´nostey vuzov / A. M. Dal´skiy, I. A. Arutyunova, T. M. Barsukova i dr.; Pod obshch. red. A. M. Dal´skogo, M.: Mashinostroenie, 1985. - 448 s.

8. Frezernyy stanok Carver SM PRO 2030 [Elektronnyy resurs] / http://www.all-ready.ru/frezernye-stanki/frezerno-gravirovalnyy-stanok-shm2030Zagl. s ekrana. (data obrashcheniya: 27.12.2014)

9. Tseny na uslugi gidroabrazivnoy rezki [Elektronnyy resurs] /http://www.kit-cut.ru/ceny_na_uslugi_gidroabrazivnoj_rezkiZagl. s ekrana. (data obrashcheniya: 27.12.2014)

This work is licensed under Creative Commons Attribution 4.0 International

© INFRA-M
Support Powered by Editorum,  Instructions
Login or Create
* Forgot password?