from 20.10.1982 to 10.01.2016
Ufa state aviation technical University (Fundamentals of design of mechanisms and machines, associate Professor)
from 10.01.2016 until now
Ufa, Ufa, Russian Federation
In connection with the transition of universities of the Russian Federation to teaching students according to the standards of the Federal State Educational Standards of Higher Education 3 ++, the task of forming the professional competencies of the graduate based on the relevant professional standards becomes urgent. The article describes the main stages of standardization of higher professional education in the USSR and the Russian Federation and what documents regulated the volume of taught graphic disciplines in technical universities and the content of these disciplines. The issues of the competency-based model of education are considered, such as the concept of com-petence, classification of competencies. Much attention is paid to graphic competencies. It tells about the experience of the department of descriptive geometry and drawing at the Ufa State Avia-tion Technical University with graduating departments in the formation of professional competencies based on professional standards, drawing up curricula and the main educational program.
standards of higher professional education, competence model of education, graphic competence, professional competence, professional standards, modernization of the classical course of descriptive geometry
1. Astahova L.V., Poluektova O.K. Razvitie graficheskoj kompetencii budush-chego inzhenera v vuze [Development of graphic competence of the future engineer at the University]. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Obrazovanie. Pedagogicheskie nauki [Bulletin of the South Ural State University. Se-ries: Education. Pedagogical sciences]. Chelyabinsk, YuURGU Publ., 2014, V. 6, I. 2, pp. 48-58.
2. Baydenko V.I., Zantvort Dzherri van. Modernizatsiya professionalnogo obra-zovaniya: sovremennyiy etap [Modernization of vocational education: the modern stage]. Moscow, Issledovatelskiy tsentr problem kachestva podgotovki spetsialistov Publ., 2003. 674 p.
3. Baydenko V.I. Vyiyavlenie sostava kompetentsiy vyipusknikov vuzov kak neob-hodimyiy etap proektirovaniya GOS VPO novogo pokoleniya: Metodicheskoe posobie [Revealing the composition of competencies of university graduates as a necessary stage in the design of new generation of state educational standards of higher professional education: Methodological manual]. Moscow, Issledovatelskiy tsentr problem kachestva podgotovki spetsialistov Publ., 2006. 72 p.
4. Verbitskiy A.A. Kompetentnostnyiy podhod i teoriya kontekstnogo obucheni-ya: Materialyi k chetvertomu zasedaniyu metodologicheskogo seminara 16 noyabrya 2004 g. [Competency-based approach and theory of contextual education: Materials for the fourth meeting of the methodological seminar November 16, 2004]. Moscow, Issle-dovatelskiy tsentr problem kachestva podgotovki spetsialistov Publ., 2004. 84 p.
5. Ermilova N.Yu. Graficheskoe obrazovanie inzhenera: kompetentnostnyj podhod [Graphic education of an engineer: competency-based approach]. Internet-vestnik Vol-gGASU. Seria: Politematicheskaya [Internet bulletin VolgGASU. Serya: Political]. 2011, v. 4(19), 7 p. Available at: www.vestnik.vgasu.ru.
6. Ermilova N.Yu., Dzhugan T.V. Graficheskie kompetencii v strukture obshchej professional'noj kompetentnosti budushchego inzhenera [Graphic competencies in the structure of the general professional competence of the future engineer]. Internet bulletin VolgGASU. Ser.: Political [Internet-vestnik VolgGASU. Ser.: Politematicheskaya]. 2011, V. 4(19), 6 p. Available at: www.vestnik.vgasu.ru.
7. Efremova N.F. Formirovanie i otsenivanie kompetentsiy v obrazovanii [For-mation and assessment of competencies in education]. Rostov-on-Don, Arkol Publ., 2010. 386 p.
8. Zimnyaya I.A. Klyuchevye kompetencii - novaya paradigma rezul'tatov obra-zovaniya [Key competencies - a new paradigm of education outcomes]. Vyisshee obra-zovanie segodnya [Higher education today]. 2003, V. 5, pp. 34-42.
9. Zimnyaya I.A. Klyuchevye kompetentnosti kak rezul'tativno-celevaya osnova kompetentnostnogo podhoda v obrazovanii. Avtorskaya versiya [Key competencies as an effective and targeted basis of the competency-based approach in education. Author's version]. Moscow: Issledovatel'skij centr problem kachestva podgotovki specialistov Publ., 2004. 42 p.
10. Pahareva I.V. Ispol'zovanie sovremennyh tekhnologij proektirovaniya kak os-novy formirovaniya graficheskoj kompetentnosti studenta vuza [The use of modern de-sign technologies as the basis for the formation of graphic competence of a university student]. Uspekhi sovremennoj nauki [Successes in modern science]. 2016, V. 2, I. 2, pp. 134-137.
11. Polikarpov Yu.V. Soderzhanie vuzovskogo kursa nachertatel'noj geometrii v epohu tret'ej promyshlennoj revolyucii [The content of the university course of descrip-tive geometry in the era of the third industrial revolution]. Geometriya i grafika [Geom-etry and Graphics]. 2018, I. 3, pp. 49-55. DOI: https://doi.org/10.12737/article_5bc453447db654.91666264
12. Polikarpov Yu.V., Semashko M.A., Hudyakova L.P. Ob uchebno-metodicheskom komplekse discipliny «Inzhenernaya i komp'yuternaya grafika» v usloviyah modernizacii kursa nachertatel'noj geometrii [About the educational-methodical complex of the discipline "Engineering and computer graphics" in conditions of modernization of the course of descriptive geometry]. Standarty i monitoring v obrazovanii [Standards and monitoring in education]. 2018, I. 5, pp. 34-40. DOI: https://doi.org/10.12737/article_5bb6117c69b067.40100676
13. Primernaya programma discipliny «Nachertatel'naya geometriya. Inzhe-nernaya grafika». Dlya tekhnicheskih napravlenij [The approximate program of the discipline “Descriptive geometry. Engineering graphics". For technical areas]. Moscow: Vysshaya shkola Publ., 2001. 14 p.
14. Professional'nyj standart 28.003 - Specialist po avtomatizacii i mekhanizacii tekhnologicheskih processov mekhanosborochnogo proizvodstva. Utverzhden prikazom Ministerstva truda i social'noj zashchity Rossijskoj Federacii № 503n ot 18 iyulya 2019 g. Zaregistrirovano Ministerstvom yusticii Rossijskoj Federacii. Registracionnyj № 55600 ot 14 avgusta 2019 g. [Professional standard 28.003 - Specialist in automation and mechanization of technological processes of mechanical assembly production. Approved by order of the Ministry of Labor and Social Protection of the Russian Federation No. 503n dated July 18, 2019. Registered by the Ministry of Justice of the Russian Federation. Registration No. 55600 dated August 14, 2019].
15. Rekomendacii dlya obrazovatel'nyh organizacij po formirovaniyu osnovnyh professional'nyh obrazovatel'nyh programm vysshego obrazovaniya na osnove profes-sional'nyh standartov i inyh istochnikov soderzhashchih trebovaniya k kompetencii rabotnikov, v sootvetstvii s aktualizirovannymi federal'nymi gosudarstvennymi obra-zovatel'nymi standartami v usloviyah otsutstviya utverzhdennyh primernyh osnovnyh obrazovatel'nyh programm (Nacional'nyj sovet pri Prezidente Rossijskoj Federacii po professional'nym kvalifikaciyam) ot 18.04.2019 №NSPK-53/01 [Recommendations for educational organizations on the formation of basic professional educational programs of higher education on the basis of professional standards and other sources containing requirements for the competence of employees, in accordance with the updated federal state educational standards in the absence of approved approximate basic educational programs (National Council under the President of the Russian Federation according to professional qualifications) dated April 18, 2019 No.NSPK-53/01].
16. Russkih T.I. Formirovanie graficheskoj kompetencii u budushchih bakalavrov tekhniki i tekhnologij. Kand. Diss [The formation of graphic competence in future bachelors of engineering and technology. Cand. Diss]. Kirov, 2010. 22 p.
17. Selezneva N.A. Problema realizacii kompetentnostnogo podhoda k rezul'ta-tam obrazovaniya v vysshej shkole [The problem of implementing a competency-based approach to the results of education in higher education]. Moscow: Issledovatel'skij centr problem kachestva podgotovki specialistov Publ., 2009. 72 p.
18. Federal'nyj Gosudarstvennyj obrazovatel'nyj standart vysshego obrazovaniya (FGOS VO). Uroven' vysshego obrazovaniya: Bakalavriat. Napravlenie podgotovki: 15.03.01 Mashinostroenie. Registracionnyj № 957 (Utverzhden prikazom Ministerstva obrazovaniya i nauki Rossijskoj Federacii ot 03 sentyabrya 2015 g.) [Federal State Educational Standard of Higher Education (GEF HE). Level of higher education: Undergraduate. Direction of preparation: 03.15.01 Engineering. Registration No. 957 (Approved by order of the Ministry of Education and Science of the Russian Federation of September 03, 2015)].
19. Federal'nyj gosudarstvennyj obrazovatel'nyj standart vysshego obrazovaniya - bakalavriat po napravleniyu podgotovki 15.03.01 Mashinostroenie (proekt) [Federal state educational standard of higher education - undergraduate in the direction of prepa-ration 03.15.01 Engineering (project)]. Available at: http://fgosvo.ru/uploadfiles/ProjFGOSVO3++/Bak3++/150301_B_3_plus_28102019.pdf
20. Fedotova N.V. Osnovy formirovaniya graficheskoj kompetentnosti budush-chih inzhenerov [Fundamentals of the formation of graphic competence of future engi-neers]. Pedagogicheskij zhurnal [Pedagogical journal]. 2011, I. 1, pp. 96-102.
21. Hutorskoj A.V. Klyuchevye kompetencii kak komponent lichnostno-orientirovannoj paradigmy obrazovaniya [Key competencies as a component of a per-sonality-oriented education paradigm]. Narodnoe obrazovanie [Public Education]. 2003, I. 2, pp. 58-64.
22. Shutov A.I. Formirovanie graficheskoj kompetentnosti u studentov tekhnich-eskih vuzov v processe izucheniya inzhenernoj grafiki [The formation of graphic com-petence among students of technical universities in the process of studying engineering graphics]. Nauchnoe obozrenie [Public Education]. 2014, I. 4-5, pp. 125-131.
23. Yusupova O.V., Spravchikova N.A. Mesto graficheskoj kompetencii v strukture professional'nyh kompetencij bakalavrov, specialistov i magistrov napravlenij «Stroitel'stvo» i «Arhitektura» [The place of graphic competence in the structure of pro-fessional competencies of bachelors, specialists and masters in the areas of "Construc-tion" and "Architecture"]. Izvestiya Samarskogo nauchnogo centra Rossijskoj akademii nauk [Bulletin of the Samara Scientific Center of the Russian Academy of Sciences]. 2013, V. 15, I. 2-4, pp. 938-943.
