employee
Belgorod, Belgorod, Russian Federation
Russian Federation
Belgorod, Belgorod, Russian Federation
Russian Federation
Currently, disintegrators are equipment used for grinding and mixing various materials. The ad-vantages of disintegrators are the ability to control the rotation frequency of the rotors and change the geometric parameters to obtain a grinding product with the required grain composition, as well as the simplicity of the design. This article describes the flow of a two-phase medium from the grinding chamber to the outlet pipe, whose axis is shifted relative to the plane passing through the center of rotation of the rotors. A design scheme for the two-phase flow into the outlet pipe in a plane perpen-dicular to the axis of the cylindrical body is presented. It is assumed that the movement of the two-phase medium from the grinding chamber to the outlet pipe occurs at a constant modulus speed. The diagram of the two-phase flow is considered taking into account that the length of the outlet pipe sig-nificantly exceeds its width. The relations determining the change of the velocity vector components near the two-phase flow outlet to the outlet pipe are obtained. Based on the obtained expressions, the trajectory of the two-phase flow from the grinding chamber to the outlet pipe is determined. Thus, us-ing the results of this theoretical study, it is possible to provide a rational ratio of the main design pa-rameters of the disintegrator unloading unit.
disintegrator, the grinding chamber, two-phase environment, particles.
1. Hint I.A. Fundamentals of production silicalite products [Osnovy proizvodstva silikal'citnyh izdelij]. M.: Stroyizdat, 1962. 636 p. (rus)
2. Kuhling X. Handbook of physics [Sppavochnik po fizike]. M., Mir, 1985. 196 p. (rus)
3. Bogdanov V.S., Semikopenko I.A., Maslovskaya A.N., Aleksandrova E.B. Disintegrator with increased loads on the crushed material. Construction and road machinery [Dezintegrator s povyshennymi nagruzkami na izmel'chaemyj material]. 2009. No. 5. Pp. 51-54. (rus)
4. Danilov R.G. The hypothesis of the mechanism of fine grinding in rotary mills with gear-like gearing. Building materials Industry and construction industry [Gipoteza mekhanizma tonkogo izmel'cheniya v rotornyh mel'nicah s zubchatopodobnym zacepleniem]. Promyshlennost' strojmaterialov i strojindustriya. Energo- i resurso-sberezhenie v usloviyah rynochnyh otnoshenij: Sb. dokl. Mezhdunar. konf. CH.4. Belgorod, 1997. Pp. 164-168. (rus)
5. Bogdanov V.S., Semikopenko I.A., Voronov V.P. Disintegrators. Designs. Theory. Experiment [Dezintegratory. Konstrukcii. Teoriya. Eksperiment]. Belgorod: BGTU. 2016, 235 p. (rus)
