Rostov-on-Don, Rostov-on-Don, Russian Federation
Rostov-on-Don, Rostov-on-Don, Russian Federation
Azov, Rostov-on-Don, Russian Federation
One of the main stages of product preparation to the utilization providing for product decontamination is considered. It is shown that the most promising decontamination methods are mechanical-chemical methods for cleaning based on the application of different oscillation ranges of processing environment. There is offered an energy condition of effectiveness which allows carrying out the development and optimization of a vibro-cleaning technological process for specified pollutants and product material and also dependence for the assessment of its duration.
utilization, cleaning, vibration treatment, adhesion, cavitation, processing environment
1. Kozlov, Yu.S., Kuznetsov, O.K., Telnov, A.F. Product Decontamination in Mechanical Engineering. - M.: Mechani-cal Engineering, 1982. - pp. 260.
2. Babichev, A.P. Vibration Technological Use in Opera-tions of Parts Finish-Cleaning (Cleaning, Washing, Burrs and Barbs Elimination, Edge Processing) / A.P. Babichev, P.D. Motrenko, L.K. Gillespiy [et al.].; under the editorship of A.P. Babichev. - Rostov-upon-Don: Publishing Center of DSTU, 2010. - pp. 289.
3. Zimon, A.D. Liquid Adhesion and Wetting - M.: Chemi-stry, 1974. - pp. 416.
4. Smirnov, N.S. Prostakov, M.E., Lipkin, Ya.N. Steel Sur-face Decontamination. - M.: Metallurgy, 1987. - pp. 232.
5. Deryagin, B.V., Churaev, N.V., Muller, V.M. Surface Forces. - M.: Science, 1985. - pp. 398.
6. Rosenberg, L.D. Physics and Engineering of Power Ul-trasonic Technology. - M,: Science, 1970. - pp. 689.
7. Agranat, B.A. Ultrasonic Technology. - M.: Metallurgy. 1974. - pp. 504.
8. Lebedev, V.A., Vyalikov, I.L. Assessment of ultrasonic oscillation impact effectiveness upon intensity increase of parts vibration finishing // Science Intensive Technologies in Mechanical Engineering. - 2014. - No.4 (34). - pp. 32-43.
9. Tamarkin, M.A., Tischenko, E.E., Vinogradov, D.V. Raschet tehnologicheskih parametrov pri CRO // Progressivnye tehnologii v mashino- i priborostroenii / Sb. st. po materialam Vseros. nauch.-tehn. konf., N. Novgorod; Arzamas, 2002. - S. 141-145.
10. Tamarkin, M.A., Tishchenko, E.E., Vinogradov, D.V. Efficient technologies in mechanical engineering and instru-ment making / Proceedings of the All-Russian Scientific-Tech. Conf., Nizhny Novgorod; Arzamas, 2002. - pp. 141-145.
