Russian Federation
Russian Federation
Astrahan', Astrakhan, Russian Federation
UDC 534
A methodology is presented for the algorithmic construction and detailed differential-geometric analysis of a family of transcendental curves described by points of planetary mechanisms (hypocycloids, epicycloids, cycloids, ellipses). The methodology is implemented as a complex of universal programs within the Maple mathematical software environment, which allows combining precise symbolic calculations with powerful graphical modeling tools. The complex automates key stages of geometric analysis: from generating the parametric equations of the curve to calculating and visualizing differential characteristics such as the magnitude of the tangent vector (velocity), the vector of curvature (acceleration), and the radius of curvature $\rho$ at any given point. Particular attention is paid to the graphical representation of the mechanisms for reproducing the curves in the form of two- and three-dimensional animated models that display the base points and their trajectories. The development is adapted for use in courses on mechanics, computer geometry, and engineering graphics, allowing for the generation of unique multivariate educational problems and contributing to the development of algorithmic and spatial thinking skills.
computer geometry, engineering graphics, transcendental curves, parametric curves, differential geometry, visualization, algorithmic construction, planetary mechanism, hypocycloid, epicycloid, cycloid, Maple, computer algebra, radius of curvature, CAD systems, animated modeling, teaching methodology, geometric analysis
1. Andryushina T.V. Problemy ispol'zovaniya elektronnyh obrazovatel'nyh resursov v tehnicheskom vuze [Tekst] / T.V. Andryushina, I.G. Vovnova // Elektronnye obrazovatel'nye tehnologii: resheniya, problemy, perspektivy: materialy III Mezhdunar. nauch.-prakt. konf. Novosibirsk: Izd-vo SGUPS, 2019. — S. 19–23.
2. Artobolevskiy I.I. Mehanizmy v sovremennoy tehnike. T. 2. [Tekst] / I.I. Artobolevskiy — M.: Nauka, 1979. — 559 s.
3. Bazenkov T.N. Perehod ot tradicionnogo prepodavaniya graficheskih disciplin k aktivnomu ispol'zovaniyu sovremennyh informacionnyh tehnologiy [Tekst] / T.N. Bazenkov, N.S. Vinnik, V.A. Morozova // Innovacionnye tehnologii v inzhenernoy grafike. Problemy i perspektivy: materialy Mezhdunar. nauch.-prakt. konf., Brest, 20 aprelya 2016 g. — Brest, 2016. — S. 16–20.
4. Vyshnepol'skiy V.I. Vserossiyskiy nauchno-metodicheskiy seminar «Geometriya i grafika» 2020 g. [Tekst] / V.I. Vyshnepol'skiy // Zhurnal estestvenno-nauchnyh issledovaniy. — 2020. — T. 5. — № 4. — S. 5–10.
5. Vyshnepol'skiy V.I. Vserossiyskie nauchno-metodicheskaya konferenciya «Problemy inzhenernoy geometrii» i seminar «Geometriya i grafika»: itogi 2021 g. [Tekst] / V.I. Vyshnepol'skiy, N.S. Kadykova, T.A. Vereschagina // Geometriya i grafika. — 2022. — T. 10. — № 2. S. 35–52. — DOI: 10. 12737/2308-4898-2022-10-2-35-52 DOI: https://doi.org/10.12737/2308-4898-2022-10-2-35-52
6. Golovnin A.A. Bazovye algoritmy komp'yuternoy grafiki [Tekst] / A.A. Golovnin // Problemy kachestva graficheskoy podgotovki studentov v tehnicheskom vuze: tradicii i innovacii: Materialy VI Mezhdunarodnoy nauchno-prakticheskoy konferencii (Perm', fevral' mart 2016 g.) Vypusk 3. — Perm': Izd-vo Permskogo nacional'nogo issledovatel'skogo politehnicheskogo universiteta, 2016. — S. 13–30.
7. Damchaasuren H. Vnedrenie elektronnoy tehnologii v obrazovanie [Tekst] / H. Damchaasuren // Geometriya i grafika. — 2021. — T. 9. — № 3. — S. 39–45. — DOI:https://doi.org/10.12737/2308-4898-2021-9-3-39-45
8. Ivanov G.S. Konstruirovanie tehnicheskih poverhnostey (matematicheskoe modelirovanie na osnove nelineynyh preobrazovaniy) [Tekst] / G.S. Ivanov. — M.: Mashinostroenie, 1987. — 192 s.
9. Kirsanov M.N. Praktika programmirovaniya v sisteme Maple [Tekst] / M.N. Kirsanov — M.: MEI, 2011. — 208 s.
10. Kozlova I.A. Graficheskie discipliny i informatizaciya inzhenernogo obrazovaniya [Tekst] / R.B. Slavin, B.M. Slavin // Geometriya i grafika. — 2022. — T. 10. № 4. — S.35 — 45. – DOI:https://doi.org/10.12737/2308-4898-2022-104-35-45
11. Kokareva Ya.A. Konstruirovanie kanalovyh poverhnostey s peremennoy obrazuyuschey i ploskost'yu parallelizma na osnove ekviaffinnyh preobrazovaniy ploskosti [Tekst] / Ya.A. Kokareva // Geometriya i grafika. — 2017. — T. 5. — № 1. — S. 12–20. — DOIhttps://doi.org/10.12737/25119
12. Korotkiy V.A. Krivye vtorogo poryadka v zadachah formoobrazovaniya arhitekturnyh obolochek [Tekst] / V.A. Korotkiy, E.A. Usmanova // Izvestiya vuzov. Seriya «Stroitel'stvo». — 2014. — № 9-10. — S. 101–107.
13. Nevenchannaya T.O. Distancionnyy informacionno-spravochno-obuchayuschiy (ISO) kompleks dlya nauchnyh issledovaniy i obrazovatel'noy deyatel'nosti [Tekst] / T.O Nevenchannaya, V.E. Pavlovskiy, E.V. Ponomareva // Vestnik Moskovskogo gosudarstvennogo universiteta pechati. — 2009. — № 1. — 2009. — S. 47–64.
14. Panchuk K.L. Ciklicheskie poverhnosti, soprovozhdayuschie nelineychatye kvadriki vrascheniya [Tekst] / K.L. Panchuk, T.M. Myasoedova, E.V. Lyubchinov // Omskiy nauchnyy vestnik. — 2023. — № 3. — S. 23–29. DOI:https://doi.org/10.25206/1813-8225-2023-187-23-29
15. Ponomareva E.V., Hohlova O.A., Hohlov A.V. Programma dlya rascheta osnovnyh kinematicheskih parametrov dvizheniya material'noy tochki // Svidetel'stvo ob oficial'noy registracii № 2010614882, Rospatent, Moskva, 2010 (zaregistrirovano 27 iyulya 2010 g.).
16. Rukavishnikov V.A. Informatizaciya geometrograficheskoy podgotovki inzhenera [Tekst] / V.A. Rukavishnikov, V.V. Haluev // Informatizaciya inzhenernogo obrazovaniya: III mezhdunar. nauch.-metod. konf. INFORINO-2012. — M.: Izd-vo MEI, 2012. — S. 109–112.
17. Rustamyan V.V. Sinteticheskoe predstavlenie preobrazovaniya «kosaya simmetriya» na primere preobrazovaniya ellipsa [Tekst] / V.V. Rustamyan, E.V. Bayanov, R.B. Slavin // Geometriya i grafika. — 2023. — T. 11. — № 3. — S. 12–18. — DOI:https://doi.org/10.12737/2308-4898-2023-11-3-12-18
18. Sal'kov N.A. Kachestvo geometricheskogo obrazovaniya pri razlichnyh podhodah k metodike obucheniya [Tekst] / N.A. Sal'kov // Geometriya i grafika. — 2020. — T. 8. № 4. — S. 47–60. — DOI:https://doi.org/10.12373/2308-4898-2021-8-447-60
19. Sal'kov N.A. Ellips: kasatel'naya i normal' [Tekst] / N.A. Sal'kov // Geometriya i grafika. — 2013. — T. 1. № 1. — C. 35–37. — DOI:https://doi.org/10.12737/470
20. Sinel'schikov A.V., Ponomareva E.V., Slavin B.M., Slavin R.B., Hohlova O.A., Korneeva N.N. Programma dlya rascheta kinematicheskih parametrov planetarnyh mehanizmov s vnutrennim zacepleniem // Svidetel'stvo ob oficial'noy registracii № 2023668190, Rospatent, Moskva, 2023. Zayavka № 2023667077; Zaregistr. v reestre programm dlya EVM 24.08.2023.
21. Sinel'schikov A.V., Ponomareva E.V., Slavin B.M., Slavin R.B., Hohlova O.A., Korneeva N.N. Programma dlya rascheta kinematicheskih parametrov planetarnyh mehanizmov s vneshnim zacepleniem // Svidetel'stvo ob oficial'noy registracii № 2023668236, Rospatent, Moskva, 2023. Zayavka № 2023667083; Zaregistr. v reestre programm dlya EVM 24.08.2023.
22. Sinel'schikov A.V., Ponomareva E.V., Slavin B.M., Slavin R.B., Hohlova O.A., Korneeva N.N. Programma dlya rascheta kinematicheskih parametrov mehanizmov, prednaznachennyh dlya vosproizvedeniya krivyh // Svidetel'stvo ob oficial'noy registracii № 2023660182, Rospatent, Moskva, 2023. Zayavka № 2023618725; Zaregistr. v reestre programm dlya EVM 18.05.2023.
23. Sinel'schikov A.V., Ponomareva E.V., Ponomareva E.D., Hohlova O.A. Programma dlya modelirovaniya mehanicheskoy sistemy s ellipticheskoy traektoriey bazovyh tochek // Svidetel'stvo o gosudarstvennoy registracii programmy dlya EVM № 2025617051. — Zayavka № 2025615019; Zaregistr. v reestre programm dlya EVM 21.03.2025. — M.: Rospatent, 2025.
24. Sinel'schikov A.V. Maple v inzhenernom obrazovanii: modelirovanie i analiz mehanizmov vosproizvedeniya krivyh [Tekst] / A.V. Sinel'schikov, E.D. Ponomareva, E.V. Ponomareva // Inzhenerno-stroitel'nyy vestnik Prikaspiya. — 2025. — № 2. — S. 73–80. DOI: https://doi.org/10.52684/2312-3702-2025-52-2-73-80
25. Sinel'schikov A.V. O komplekse universal'nyh programm dlya komp'yuternogo modelirovaniya v oblasti mehaniki [Tekst] / A.V. Sinel'schikov, E.D. Ponomareva, E.V. Ponomareva, O.A. Hohlova // 69-ya Mezhdunarodnaya nauchnaya konferenciya Astrahanskogo gosudarstvennogo tehnicheskogo universiteta, posvyaschennaya 95-letiyu so dnya osnovaniya AIRH-ATIRPIH. — Astrahan', 2025. S. 369–372.
26. Sinel'schikov A.V., Ponomareva E.V. Razrabotka kompleksa universal'nyh mws-programm (Maple) dlya komp'yuternogo modelirovaniya i avtomatizacii raschetov v oblasti mehaniki [Tekst] / A.V. Sinel'schikov, E.V. Ponomareva // Vestnik Astrahanskogo gos. tehn. un-ta. № 1. Seriya: Upravlenie, vychislitel'naya tehnika i informatika. — 2014. — C. 69–80.
27. Slavin R.B. Razrabotka sistemy poluavtomaticheskogo modelirovaniya trehmernyh izobrazheniy [Tekst] / R.B. Slavin, N.S. Kargin, B.M. Slavin // Geometriya i grafika. — 2023. — T. 11. — № 2. — S. 47–55. — DOI:https://doi.org/10.12737/2308-4898-2023-11-2-47-55
28. Ten M.G. Formirovanie professional'nyh kompetenciy studentov tehnicheskih special'nostey v processe graficheskoy podgotovki [Tekst] / M.G. Ten // Geometriya i grafika. — 2015. — T. 3. — № 1. — C. 59–63. — DOI:https://doi.org/10.12737/10459
29. Yakunin V.I. Geometricheskoe modelirovanie kak obobschenie metodov prikladnoy geometrii i ee razdelov [Tekst] / V.I. Yakunin, V.N. Guznenkov // Integral. 2012. — № 5. — S. 120–121.
