The article sets out the impact of automotive glass to the safe operation of the vehicle, basic notions of the strength of glass that explain demonstratively strengthening characteristics of glass and demonstrate an important role of surface microdefects and protection methods from them. In addition, this article offers an alternative method of protection
windscreen, surface microdefects
1. O. N. Shamysheva, R. I. Makarov. Control of a float glass annealing. Glass and Ceramics, 2012, №1, r. 12-23.
2. Griffith A.A. The phenomena of rupture and flow in solids. Phil. Trans. Roy. Soc. London, 1920, A221, p.163-198.
3. Khimicheskaya tekhnologiya stekla i sitallov [Tekst]: Uchebnik dlya vuzov / Pod red. N.M. Pavlushkina - M.: Stroyizdat, 1983. - 432 s.
4. Fiziko-khimicheskie osnovy proizvodstva opticheskogo stekla [Tekst]. Pod red. L.I. Demkinoy, «Khimiya», Leningrad, 1976, s.162-163.
5. Menuik J. Glass Science and Technology 12, Strength and Fracture of Glass and Ceramics. Amsterdam-New York-Tokyo: Elsevier, 1992. 357 p.
6. Hand R.J., Ellis B., Whittle B.R., Wang F.H. Epoxy based coatings on glass: strengthening mechanisms. Journal of Non-Crystalline Solids. 2003. V. 315. № 3. P. 276-287.
7. Verganelakis V., Nicolaou P.D., Trapalis C., Kordas G. Evaluation of the critical processing parameters of ormosil coatings on the increase of the strength of glass. Journal of Non-Crystalline Solids. 2000. V. 265. № 3. P. 265-275.
8. Raschet i proektirovanie zashchitnoy nakladki na vetrovoe steklo avtomobilya [Tekst]. Sbornik nauchnykh statey 3-y Mezhdunarodnoy molodezhnoy nauchnoy konferentsii 23-25 aprelya 2015 goda «Budushchee nauki - 2015» - Kursk, 2015. - S.295-299.
9. Sposob zashchity vetrovogo stekla avtomobilya ot treshchin [Tekst]. Sbornik statey VI Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii 28 noyabrya 2014 goda «Sovremennye avtomobil´nye materialy i tekhnologii (SAMIT - 2014)» - Kursk, 2014. - S. 112-117.
10. Opredelenie prichin obrazovaniya treshchin na vetrovom stekle s pomoshch´yu prochnostnogo analiza [Tekst]. Sbornik nauchnykh statey 2-y Mezhdunarodnoy molodezhnoy nauchno-prakticheskoy konferentsii (24-25 sentyabrya 2015 goda), v 3-kh tomakh, Tom 2, Yugo-Zap. gos.un-t., ZAO «Universitetskaya kniga» - Kursk, 2015. - S. 298-302.
11. Zashchita vetrovogo stekla avtomobilya ot mikrodefektov [Tekst]. Sbornik statey VII Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii 27 noyabrya 2015 goda «Sovremennye avtomobil´nye materialy i tekhnologii (SAMIT - 2015)» - Kursk, 2015. - S. 169-173.
12. Yur´ev N.Yu., Aksenov A.A., Tret´yakov A.I. Perspektivy primeneniya nemetallicheskikh materialov dlya detaley kuzova avtomobilya. Al´ternativnye istochniki energii v transportno-tekhnologicheskom komplekse: problemy i perspektivy ratsional´nogo ispol´zovaniya. - 2014. - № 1. - S. 465-467. DOI:https://doi.org/10.12737/13768.
13. Pukh V.P. Prochnost´ i razrushenie stekla [Tekst]. L.: Nauka. 1973. - 155 s.
14. Cherepanov G. P. Mekhanika khrupkogo razrusheniya. M.: Nauka, 1974. - 640 s.
15. Khimicheskaya tekhnologiya stekla i sitallov [Tekst]. Pod red. N.M. Pavlushkina, M., Stroyizdat. - 1983. - 432 s.
16. Glebov L.B., Dokuchaev V.G., Nikonorov N.V., Petrovskiy G.T. Izmenenie ob´´ema stekla pri nizkotemperaturnom ionnom obmene [Tekst]. Fizika i khimiya stekla. - 1988. - t.14., №2. - S.232-239.
17. Stadnichyuk V. I., Bessmertny V. S. Adjusting the strength of ceramics during fabrication process. Glass and Ceramics. 2013. №8. R. 16-23.
18. Popov S. V. Preventing crack formation in plastic molding of ceramic ware with high alumina content. Glass and Ceramics. 2013. №8. R. 11-15.
